Operation Manual, User's Manual

6-18
SYSTEM SETTINGS►SYSTEM SETTINGS
Security Settings
The following settings are related to security.
Select the [Security Settings] to configure the settings.
IPsec Settings
IPsec can be used for data transmission/reception on a
network.
Enable IPsec
Specify whether or not IPsec is used for transmission.
IKEv1 Settings
Configure the IKEv1 settings.
Pre-Shared Key
Enter the Pre-Shared Key to be used for IKEv1.
SA Lifetime (time)
Set the SA lifetime.
IKE Lifetime
Set the IKE lifetime.
Enable Filter
Enable the IP address filter or Mac address filter that is
set in “Filter” in the Web pages.
When this setting is enabled on the machine, the setting
in the device Web pages is also enabled.
The factory default setting is “Disabled”.
Initialize Private Data and Data in
Machine
The system-set values can be restored to the factory
default state after eliminating the data stored in the
machine.
• All information displayed in the fax status
• Image data in memory boxes
• Unsent fax data
• Print Hold Data
• Current values set for system settings
• Current values set for network settings
• User information > User registration information
• User information > Paper limits
• User information > Function usage restrictions
• User information > User counts
(Excluding default users)
• Fax / scanner addresses
•Groups
• User index (scanner)
• Programs
• Auto forwarding of received faxes
• Public box data
• Sender information
• Allow/Reject Number List
• Forwarding information
• Product key
Security Settings
IPsec Settings
Enable Filter
Initialize Private Data
and Data in Machine