Operation Manual, User's Manual

5-25
SCANNER►SAVING IN USB MEMORY DEVICE
USB MEMORY SCAN
USING THE USB MEMORY SCAN FUNCTION
A scanned image can be sent (save) to a commercially available USB flash memory that has been connected to the
machine.
Using the document feeder
SAVING IN USB MEMORY DEVICE
1
Make sure the machine is in scan mode.
When the SCAN indicator is lit, the machine is in scan mode. If the indicator is not lit, press the [SCAN] key ( ).
If auditing mode has been enabled for the scan function in the system settings, a message will appear prompting you to
enter your account number when you switch to scan mode. Enter your account number (five digits) with the numeric
keys.
► User Authentication
(page 6-12)
2
Place the original.
Place the original in the document feeder tray of the
automatic document feeder.
► AUTOMATIC DOCUMENT FEEDER
(page 1-31)
You cannot place originals in both the document feeder tray and on the document glass and send them in a single
transmission.
3
Press the [ADDRESS] key ( ).
4
Select "USB Memory Scan" using the
[ ] key, press the [OK] key.
Address Book
USB Memory Scan