Operation Manual, User's Manual

5-9
SCANNER►SCANNER SEQUENCE
SELECTING A DESTINATION (USING THE [ADDRESS]
KEY)
A destination can be selected using one of three methods: Selecting from "ADDRESS BOOK", using "ADDRESS
ENTRY", or "ADDRESS SEARCH".
Address book
Address entry
• Multiple destination scan be selected for a Scan to E-mail transmission. (E-mail and Group (E-mail) destinations can be
selected at the maximum of 20 destinations, which will consequently allow broadcasting up to 300 individual destinations
in total. )
• Only one destination can be selected for a Scan to Network, Scan to FTP or Scan to Desktop transmission.
1
Press the [ADDRESS] key ( ), and select the "Address Book".
2
Change tabs as needed with the [ ] or [ ] key and
select the desired destination with the [ ] or [ ] key.
You can switch between information on the selected destination and the destination list
by pressing the [READ-END] key ( ).
3
Press the [READ-END] key ().
A checkmark appears by the selected destination. To cancel the selection, press the [READ-END] key ( ) once again
to remove the checkmark. To select multiple destinations, repeat steps.
1
Press the [ADDRESS] key ( ), and select "Address Entry" with the [ ] key,
and press the [OK] key.
2
Enter the destination address.
3
Press the [OK] key.