Operation Manual, User's Manual

4-8
FACSIMILE►BASIC TRANSMISSION METHODS
SENDING A FAX
BASIC PROCEDURE FOR SENDING FAXES
Using the document feeder
1
Make sure that the machine is in fax
mode.
The FAX indicator is lit when the machine is in fax mode. If
the indicator is not lit, press the [FAX] key ( ).
If user authentication has been enabled for the fax function
in the system settings, a message will appear prompting you
to enter your user number when you switch to fax mode.
Enter your account number (5 digits) with the numeric keys.
► User Authentication
(page 6-12)
2
Place the original.
Place the original in the document feeder tray of the
automatic document feeder.
► AUTOMATIC DOCUMENT FEEDER
(page 1-31)
This is a single transmission operation, and therefore originals cannot be scanned in succession from both the
document feeder and the document glass.
3
Specify the original size.
One-side scanning
When the original is placed in the automatic document
feeder, the detected original size is shown.
Two-side scanning
For the procedure for specifying the original size see
FAXING A TWO-SIDED ORIGINAL
(page 4-14).
.................. One-sided scanning in the document feeder.
.................. Two-sided scanning in the document feeder.
None ............... Document glass
To use a long original, select “Long”.
4
If needed, adjust the resolution and exposure settings.
Stand-by.
Auto
Memory
Cont
Standard
22 : 25
SAT
OCT