Operation Manual, User's Manual

4-5
FACSIMILE►BASIC TRANSMISSION METHODS
ORIGINALS
ORIGINALS THAT CAN BE FAXED
For originals that can be set, see HOW TO PLACE THE ORIGINAL (page 1-31).
* Long originals
Depending on the resolution setting and the width of the original, there may not be sufficient space in memory to hold
a long original. When a long original cannot be entirely scanned, use direct transmission or manual transmission
(on-hook dialling).
ORIGINAL ORIENTATION
When an A4 (8-1/2" x 11") original is placed in vertical orientation ( ), the image is automatically rotated 90 degrees
and transmitted in horizontal orientation ( ) (Rotation Sending).
If the original is placed in horizontal orientation ( ), it is transmitted in that orientation ( ) without being rotated.
Originals of length 297 mm (11-45/64") and width up to 500 mm (19-11/16") can be placed in the automatic document feeder.
Rotation sending is not available for originals with A4R, B5, or A5 (8-1/2" x 11" or 5-1/2" x 8-1/2") size.
To cancel the rotation sending setting:
In "System Settings (administrator)", select [Fax] → [Sending Function] → [Rotate TX].
If this setting is disabled, the original will be transmitted in the orientation in which it is placed.
Because of this, some receiving machines may reduce the received data.
A4 (8-1/2" x 11") Rotated to
A4R (8-1/2" x 11")
orientation
A4R (8-1/2" x 11") image is
transmitted.
Send