Operation Manual, Troubleshooting

26
TROUBLESHOOTING
Misfeed in the transport area C
Misfeed in the transport area D
1
Remove the misfed paper.
Grasp and lift the conveyor lever, and remove the misfed paper slowly so that it does
not tear.
2
Return the duplex conveyor lever to its original position and close the side cover.
The message will be cleared and copying will be possible.
• When closing the side cover, press on around the handle.
• If the paper was torn, make sure that no torn pieces remain in the machine.
• If the message does not clear, check again to make sure that no pieces of paper remain.
1
Remove the misfed paper.
Press the paper feed lever several times to feed out the paper.
Remove the paper slowly so that it does not tear.
2
Close the side cover.
The message will be cleared and copying will be possible.
• When closing the side cover, press on around the handle.
• If the paper was torn, make sure that no torn pieces remain in the machine.
• If the message does not clear, check again to make sure that no pieces of paper remain.
• When removing misfed paper, do not touch or damage the transfer belt and the transfer roller.
• Be careful about unfixed toner on the misfed paper not to soil your hands or clothes.