User's Manual

10
www.ninjakitchen.co m
USING THE DISCS
IMPORTANT: Only use Speed 1 when using either
disc attachment.
NOTE: The Slicing/Shredding Disc is reversible. Use the
side labeled “Slicer” for Slicing. Carefully flip the disc over
to the side labeled “Shredder” for shredding.
1 Place the motor base on a clean, dry, level surface such
as a counter or table top. (Fig. 5)
2 Secure the bowl onto the motor base.
3 Place the spindle inside the bowl.
4 Use the finger holes to grasp the selected disc and place it
over the spindle.
5 Place the feed chute lid on the bowl and turn clockwise
until you here a click indicating the lid is locked in place.
(Fig. 5)
6 Plug the power cord into the electrical outlet and press the
power button (
) to turn the unit “On”.
7 Select Speed 1 on the control panel. The discs will
begin spinning.
8 Add the food that you want to slice, shred or grate through
the feed chute on the lid. (Fig. 5) Use the two-part food
pusher to help guide the food through the feed chute. The
middle piece of the food pusher is removable to use for
smaller ingredients.
9 When finished, stop the appliance by pressing the power
button (
) and wait for the disc to stop turning. Press the
button on the feed chute lid located near the handle to
unlock and turn the lid counterclockwise. Lift to remove
from the processor bowl. Using the finger holes, carefully
lift the disc out of the bowl and remove the spindle.
Fig. 5
Use caution when handling the discs as the blades are very sharp.
Assembly and Use for the Disc Attachments
NOTE:
The feed chute lid features a two part pusher to guide food through
the chute. Use the full pusher for larger items such as cucumbers.
Twist and pull to remove the smaller pusher and use the narrow chute
for smaller items such as carrots.