User's Manual

9
TOLL FREE: 1-877-646-5288
USING THE CHOPPING BLADE ASSEMBLY
1 Holding the chopping blade assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that
the blade assembly fits around the gear shaft and that it
is standing straight.
2 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 1)
3 Plug the power cord into the electrical outlet and press
the power button (
).
4 Select the speed that best suits your needs. Pulse
ingredients for even chopping by pressing down in short
intervals.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
5 When you have reached your desired consistency, stop
the appliance by pressing the power button (
) and
wait for the blade assembly to stop turning.
6 To remove the lid, press the release button and turn the
lid counterclockwise and lift the lid off. Turn the bowl
counterclockwise and then lift off the base.
(Fig. 2, Fig. 3)
CAUTION: Blades are not locked in place. If
pouring from the bowl, ALWAYS remove the blade
assembly first before pouring.
Fig. 1
Fig. 4
USE
Fig. 2
Fig. 3
REMOVAL
USE
USING THE DOUGH BLADE
WARNING: Never leave the appliance unattended while
inuse.
IMPORTANT: Push down lightly on the base to ensure the
suction feet are adhered to the surface.
1 Holding the dough blade by the shaft, place it onto the
gear shaft inside the bowl. Ensure that the blade assembly
fits around the gear shaft and that it is standing straight.
(Fig. 4)
2 Add the ingredients and secure the bowl lid onto the bowl.
3 Plug the power cord into the electrical outlet and press on
the power button ( ). Select Speed 1 on the control panel
and process until ingredients come together to form a mass.
NOTE: Please refer to “Speed Settings & Uses” chart for
suggested uses and speeds.
4 Once finished making dough, stop the appliance by
pressing the power button ( ) and wait for the blade
assembly to stop turning.
5 To remove the lid, press the release button and turn the lid
counterclockwise. (Fig. 2)
6 Turn the bowl counterclockwise and lift it to remove it from
the motor base. (Fig. 3)
7 To release the motor base from the counter or table top,
lift the base up from underneath the sides of the unit.
Release paddles on both sides will help to disengage the
suction feet from the surface.
NOTE: The suction feet provide added stability.
Assembly and Use for the 64 oz. Bowl - cont.