Operation Manual

27
E
Menu Items
Device Information OS/OS Version
Model
Hardware ID/Serial number
Software License
Open Source Library
Admin Wireless LAN Name
Choose A New Wallpaper Choose
Install New Apps Choose
Country Select
Province / Region / State Select
City Select
Operation Mode Mode1
Power Saving Timeout: 5 mins (Standby mode)
In Device Motion Sensor: Off
Wake On LAN: Off
IoT Sensor Hub Always On: Off
Mode2
Power Saving Timeout: 5 mins (Brightness reduction)
In Device Motion Sensor: On
Wake On LAN: On
IoT Sensor Hub Always On: On
Synappx™ WorkSpaces
Change User Passcode Change
Change Admin Passcode Change
OTA Firmware Updates Update
USB Firmware Updates Update
Automatic Updates On/Off
Firmware Update Window Start Time
End Time
All Reset Reset
Reset Wireless LAN Reset
Smart Switcher On/Off
LAN1 always-on connection On/Off
Wireless Casting On/Off
Wake On LAN
*
On/Off
IoT Sensor Hub Always On
*
On/Off
In Device Motion Sensor* On/Off
*: When “Operation Mode” is set to “Mode1”, these settings can not be changed.
About “LAN1 Network” and “LAN1 always-on connection”
• “LAN1Network”setto“On”tousetheLAN1terminal.
• DisconnecttheUSBTypeCcableorUSBAtoBcable,“LAN1Network”willbesetto“Off”automatically.
If “LAN1 always-on connection” is set to “On”, “LAN1 Network” will not be set to “Off” even if the cable is disconnected.