Operation Manual

15
E
Caution
• Useonlythepowercordsuppliedwiththemonitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input
terminal.
3. Plug the power cord (supplied) into the power outlet.
Preparing the Remote Control Unit
Remote control operation range
The operation range of the remote control unit (PN-ZR02,
optional) is approx. 16.4 feet (5 m) at an angle of approx.
10° from the center to the top/bottom/right/left of the remote
control sensor.
10
°1
0°
10°
10°
Remote control sensor
16.4
feet
(5 m)
TIPS
• Donotexposetheremotecontrolunittoshockbydropping
or stepping on it. This could lead to a malfunction.
• Donotexposetheremotecontrolunittoliquids,anddonot
place it in an area with high humidity.
• Theremotecontrolunitmaynotworkproperlyiftheremote
control sensor is under direct sunlight or strong lighting.
• Objectsbetweentheremotecontrolunitandtheremote
control sensor may prevent proper operation.
• Replacethebatterieswhentheyrunlowasthismay
shorten the remote control’s operation range.
• Ifafluorescentlightisilluminatedneartheremotecontrol
unit, it may interfere with proper operation.
• Donotuseitwiththeremotecontrolofotherequipment
such as air conditioner, stereo components, etc.
Installing the batteries
1. Placeyourfingeronthepartmarkedwiththe▲,and
then pull the cover off.
2. See the instructions in the compartment and put in the
batteries (supplied with the PN-ZR02 (optional)) with
their plus (+) and minus (-) sides oriented correctly.
3. Close the cover.
TIPS
• Whenthebatteriesbecomeexhausted,replacethemwith
new (commercially available) batteries.
• Usemanganese(R03(“AAA”size))oralkaline(LR03
(“AAA” size)) batteries only.
• Thesuppliedbatteriesmaybecomeexhaustedquickly
depending on how they are stored.
• Ifyouwillnotbeusingtheremotecontrolforalongtime,
remove the batteries.
Connecting the Power Cord
Main power switch
1
AC input terminal
2
Power cord
(Supplied)
For power outlet
3
1