Manual

Before Starting Playback
/ Major functions of each button icon
This function allows you to operate this system using
the TV remote control by displaying the control panel
on the TV screen.
• To operate this function, connect this system to a TV
compatible with HDMI CEC (Consumer Electronics
Control) using an HDMI cable (see page 24). Make
sure that "Control Panel" is set to "Yes" (see page
69). When the settings are completed, perform the
following operations.
D NOTE
,, The control panel may not be displayeddepending onthe
TV.Also, it may not be availabledependingon the content.
o When operating usingthe remotecontrol of the system,
the control paneldoes not appear.
o When playingNetflixstreamingcontent, the controlpanel
cannot be displayed.
1 Switch the TV input to the input source to which
this system is connected (HDMI input).
2 Press the PLAY button on the TV remote
control.
,, The control panel appearson the TV screen.
Display the pop-up menu screen for
BD video and the menu screen for DVD
video.
,, Display the top menu screen for BD
video and DVD video.
Display the Function Control screen for
BD video, DVD video, etc.
• Fast reverse (search).
Play.
Fast forward (search).
Skip to the beginning of a chapter.
Pause.
Skip to the next chapter.
Control Panel
Jump backward (approx. 10 seconds).
(This function is used when you want
to re-watch a scene that has just been
shown.
Stop.
Jump ahead (approx. 30 seconds).
Turn off the control panel.
3
,, When there is no operation for approximately 10
seconds, the control panel disappears automatically.
To display the control panel, press the PLAY button
on the TV remote control.
Press 4/I_/A/T on the -R/remote control
to select the desired button icon, then press
ENTER.
,, The function of the selected button iconis available.
_- 38