Manual

Positioning the Speaker System
"!:Wall mount angle fixed on the wall
(Horizontal position)
1 Fix the pattern paper to the wall in horizontal
position as below.
44 mm
509 mm
Wall surface 44 mm 29 mm
@installing the Sound Bar Speaker
Before installing the speaker, connect the speaker
connection cords to the speaker. (See pages 22-23.)
1 Align the wall mount slot at the speaker to the
wall mount angle.
_2 Slot the speaker into the wall mount angle.
3 Fix them securely.
2
29 mm Patternpaper
Make a hole on the wall following the screw
point marks on the pattern paper by using a drill.
1-9/16" (40 mm)
3
4
3/8" (8-9 mm)
Wall surface
Fix a wall mount plug into the hole using a
hammer until it is flush with the wall surface.
1-9/16" (40 mm)
................................................
Wall surface
Screw the wall mount angle to the wall as shown
in the illustration. (Total screw is 8 pieces)
Wall mountie :::
Wall surface .............
Wall mount ang e _.......... s_rews
..............( x
screwsx
__all_ount angle
NOTE
,, Make sure all screws are fully tighten. (screws are not
supplied)
_- 20