Owner's Manual
SETTINGS
Communication Setup
This
allows
you
to perform and/or change the
communication setting. This setting
is
required to
use
BD-LiVE functions, the
RSS
reader function and
software updates that connect to the internet.
~NOTE
• Make sure that the LAN cable
is
connected to this Player.
(See page 18.)
• For manually performing the setting, the following
information of the connected router or modem
is
required.
Confirm the information prior to the setting.
-
IP
address, netmask, gateway, DNS address
• Besides, if specifying a proxy server, the following
information specified from your internet service provider
is
also required. Confirm the information prior to the setting.
-
IP
address and port number of the proxy server
CJ
SETUP
1 Press SETUP
to
display the Menu screen.
2 Press J;./T to select "Settings", then press
~
or
ENTER.
3 Press J;./T
to
select "Communication Setup",
then press
~
or ENTER.
4 Press ENTER, then press J;./T
to
select
"Change", and then press
ENTER again.
• For initializing the current setting, select "Initialize",
then press
ENTER.
@-
42
5 For setting the
IP
address, press
....
/~
to select
"Yes" or "No", then press
ENTER.
•
If
selecting "Yes"; The
IP
address
is
automatically
obtained.
•
If
selecting "No"; The
IP
address, netmask and
gateway are manually entered using the screen for
inputting characters. (See page 44.)
Regarding each
of
the setup values, confirm the
specifications of your broadband router.
6 Select "Next", then press ENTER.
•
If
selecting "Yes"
in
the step
5,
go to the step 9.
7 Enter your DNS address.
• The primary and secondary DNS addresses are
entered using the screen for inputting characters. (See
page 44.)
Regarding each of the setup values, confirm the
specifications
of
your broadband router.
S Select "Next", then press ENTER.
9 For setting the proxy server, press
....
/~
to
select "Yes" or "No", then press
ENTER.
•
If
selecting "Yes"; The
IP
address
or
proxy server
name and port number for the proxy server specified
from your internet service provider are entered using
the screen for inputting characters.
(See
page 44.)
•
If
selecting "No"; Go
to
the next step.
10 Select "Next", then press ENTER.