Owner's Manual
SETTINGS
Audio Out
)
)
)
Smart Settings
• Lower the audio volume before setting.
If
you
do
not do so,
the speakers may emit a loud sound
or
excessive output
may be applied to the speakers.
Auto Power
Off
This sets the Player
so
that power
is
automatically shut
off if playback
is
stopped for about 10 minutes.
Dynamic Range Control
This lets you adjust the range between the loudest
and softest sounds (dynamic range) for playback
at average volume. Use this when
it
is
hard to hear
dialog.
Item
Normal: The same audio output range
is
played as the
original recorded audio output range.
Shift*: When Dolby Digital audio
is
played back, the
dynamic range
of
the audio
is
adjusted so that the
dialog portion can be heard easily.
(If
the audio sounds
abnormal, set to "Normal".)
Auto: When you play back audio
in
the Dolby TrueHD
format, the dynamic range
is
automatically adjusted.
rItem
Yes,
No
,~
NOTE
• When "Ouick Start"
is
set
to
"Yes", the Player requires
some time to turn off.
Quick Start
This turns the Quick Start function
on
and off.
When the Quick Start function
is
on:
• The startup time of the Player
is
reduced.
• However,
power
consumption will increase.
When the Quick Start function
is
off:
• The player will enter the low power consumption mode
when
in
standby condition.
r Item
LYes, No
Front Display/LED
If
you
feel
that the indicators
on
the player's front
display
are
too bright when watching movies, you can
turn them off except for the ON/STANDBY indicator.
r Item
LOn,
Off
• Select this when connecting to
HDMI equipment with a built-in
decoder for DOLBY
DIGITAL,
etc.
• Setting to Bitstream will output
each audio signal by Bitstream.
• Select this when connecting to
multi-channel HDMI equipment.
• Setting to PCM (Surround)
will
output by LINEAR PCM by
decoding audio signals recorded
in
each audio output mode such as
DOLBY DIGITAL, DTS.
• Select this when connecting to
SURROUND equipment with
a built-in decoder for DOLBY
DIGITAL, etc.
• Setting to Bitstream will output
each audio signal by Bitstream.
• Select this when connecting to 2
channel stereo audio equipment.
• Setting to PCM will output by
converting each audio signal into
PCM 2 channel audio signal.
PCM (Surround):
Item
-----------------.,
Bitstream:
Bitstream:
PCM:
@ This sets the audio output mode
for
DIGITAL
AUDIO OUT (OPTICAL terminal) when selecting
"Digital Output".
Item
-----------------.,
2
You
can set the audio output mode for each
output terminal.
G)
This sets the audio output mode for HDMI OUT
terminal when selecting "HDMI Output".
~NOTE
• When the secondary audio
is
set
to
"On", PCM
IS
automatically selected as the audio output mode.
You
can set the audio output when connecting to
SURROUND equipment.
1 This sets the audio output connected to
SURROUND equipment.
Item
HDMI Output: Select this when you connect using HDMI
OUT terminal.
Digital Output: Select this when you connect using
DIGITAL AUDIO OUT terminal (OPTICAL),
2ch Audio Output: Select this when you do not use
SURROUND sound equipment.
~NOTE
• See page 50 for information on output of next generation
audio formats.
@-
40