Owner's Manual
SETTINGS
Audio Video Settings
TV Aspect Ratio
You
can set the screen aspect ratio of the connected
TV,
and adjust the video output.
If
you switch your
TV
(i.e.
because you
have
bought a
new
one)
and the screen aspect ratio of the connected
TV
changes, you
will
have
to change the
"TV
Aspect
Ratio" setting.
Item
Wide 16:9: Select this when connecting to a
TV
with a
16:9 screen aspect ratio.
Normal 4:3: Select this when connecting to a
TV
with a
4:3 screen aspect ratio.
<When selecting Normal 4:3>
Item
Letter Box:
If
you connect to a TV with a screen aspect
ratio of 4:3 and playback a DVD with 16:9 video, the
video will be played back with black bands at the top
and bottom while maintaining the 16:9 ratio.
Pan
Scan:
If
you connect to a
TV
with a screen aspect
ratio of 4:3 and playback a
DVD
with 16:9 video, the
video will be played back with the left and right sides of
the image cut off to display
in
4:3 screen aspect ratio.
(This
function works
if
the disc
is
labelled for 4:3PS.)
Component Video Out
This sets the resolution of the component video
output.
Some
TVs
are not fully compatible with the Blu-ray
disc
player,
which may cause the image distortion.
In
this case, press VIDEO OUTPUT RESET on the
remote control for five seconds. "Component Video
Out"
will
be reset
to
"480i" (factory preset value).
r Item
l}
080i, 720p, 480p, 480i
)
Video Out Select
Dual video output
is
possible simultaneously from the
COMPONENT VIDEO OUT jacks and the HDMI OUT
terminal witll tile following settings. Select the
Video
output which you want to have priority according to
the following chart.
~NOTE
• 1080p and AOUOS LINK are only available
in
HDMI.
Video Out
Dual HDMI
Component
Select Output
Video Out
Out Resolution
in
Dual Mode
No Auto
'1
No 1080p
No
HDMI
Yes
10801 10801
Yes
720p
nop
Yes
480p 480p
Dual Component
HDMIOut
Resolution
in
Output
Video
Out
Dual Mode
Component
Yes
10801 10801
Yes
nop
720p
Yes
480p 480p
Yes
4801
4801
'1
Depends
on
source. 1080p
IS
not available.
G
I~m
]
HDMI, Component
'---
---------'
• When the priority video output
is
selected, video
is
output
from the other
Video
terminal with the resolution of the
selected video output.
• There
is
no output from the COMPONENT VIDEO OUT
jacks and VIDEO output jack when video
is
output at
1080p resolution and the priority video output
is
selected
to "HDMI".
•
If
the video equipment connected to each of the terminals
IS not compatible with the resolution of the priority video
output. abnormalities
in
images
on
the screen may appear.
I
Secondary Audio
This toggles the clicking sound on the menu and audio
with secondary video
in
picture
in
picture mode for
BD-Video.
• Select "Off" when enjoying the high quality sounds of BD-
Video.
HOM'
Video Out
This sets the resolution of the HOMI video output.
Some TVs are not fully compatible with the Blu-ray
disc player, which may cause the image distortion.
In
this case, press VIDEO OUTPUT RESET on the
remote control for five seconds. "HDMI Video Out" will
be reset to "Auto" (factory preset value).
r Item
LAuto,
1080p, 1080i,
nop,
480p
~NOTE
• When the BD player
is
connected to a 1080p 24Hz
compatible
TV
and the "HDMI Video Out"
is
set to
"Auto", 1080p 24Hz will automatically be displayed when
compatible discs are played back.
At 1080p 24Hz/1 080p 60Hz, there
is
no output from the
COMPONENT VIDEO OUT jacks and VIDEO output jack.
)
GItem
On, Off
)
@-
39