Owner's Manual

Playback Functions
DISPLAY
o
AUDIO SUBTITLE
QT
.... SKIP _ REV FWD
GO m G!) IE)
PLAY
~
Partial Repeat Playback (Repeat
Playback of a Specified Part)
DVD VID~EO J DVD-R I DVD-RW i
AUDIOCDJ
~NOTE
• Some operations in the following playback function cannot
be performed depending on the specifications
of the disc.
1 Press REPEAT during playback.
2 Press IJ./T to select "Scene Selection", then
press ENTER.
• "Set Start Point" displays.
-
~
Scene Selection Set Start Point
3 Press ENTER at the scene where you want to
set the start point.
• "Set End Point" displays.
4 Press ENTER at the scene where you want to
set the end point.
• You can press ~ FWD to fast forward to the scene
where you want
to set the end point. When you
reach the desired scene, simply press
~ PLAY and
then
ENTER to set the end point. To cancel Repeat
Playback, press
REPEAT.
@- 34
~NOTE
• Press ~ SKIP/I~, the Repeat Playback is cancelled
and the next chapter being play back.
• Press
H<iIIIII SKIP/<41 once, the Repeat Playback is
cancelled and the player returns to the start of current
chapter (track).
•
If you press ...... SKIP/<41 again (within about 5 seconds)
the player
will skip to the beginning of the previous chapter
(track)
• For Partial Repeat Playback, set the start and end points
within the same title.
• Repeat Playback may be forbidden depending on the disc.
• Partial Repeat Playback may not work
in multi-angle
scenes.
• !f you press DISPLAY, you can confirm the Repeat
Playback status.
Displaying the Audio Information
You can display the audio information on the disc
currently being played back by pressing AUDIO.
• The displayed contents vary depending on the disc.
~Q1!P~.QJ pVD VIDEQJ
The audio track currently being played back will be
displayed.
If multiple audio channels are recorded, you can switch
the audio channel by pressing AUDIO.
.::;D""-VD;;;;,.-,,,,-R~W,--,! _D_V_D-R J
When a recorded broadcast with stereo or
monaural audio is played back:
"Stereo" is displayed. (Audio cannot be switched.)
~NOTE
• When you playa program recorded in stereo or monaural,
and if you are listening
to the Bitstream sound via the digital
output jack, you cannot select the audio channel. Set
"Audio Out"
to "peM" (Page 40), or if you want to change
the audio channel, listen via the analog output jacks.
Switching Subtitles
SO VIDEO I DVD VIDEO I
If subtitles are provided in multiple languages, you can
switch between them.
Press SUBTITLE during playback.
• The display indicates the subtitle number currently being
played back, and the subtitles appear.
Each time
SUBTITLE is pressed, the subtitles change.
•
"-" is displayed if a disc has no subtitles.
•
You can also select "Off".