Owner's Manual

Video Connections
Connecting to the HDMI Terminal
• You can enjoy high quality digital picture and sound through the HOMI terminal.
• See page 50 for information on the output of next generation audio formats.
• When you use
AQUaS LINK, make sure to use a certified HOMI cable.
STEPS
1 Be sure to turn off this Player and the equipment before making any connections.
2 Firmly connect an HOMI cable (commercially available) to the HOMI terminals (CD and @).
..
Selecting the priority video output when
connecting HDMI and Component video
When you connect both an HOMI cable and a
component cable to this player, you need to select
the priority video output in "Settings" - "Audio Video
Settings" - "Video Out Select". (See page 39.)
~NOTE
• When you connect the player to a SHARP TV with an
HOMI cable only and the
TV is turned on. the video output
switches
to HOMI automatically. (The above setting is
unnecessary.)
• When you
connect the player to a TV with an HOMI cable,
"HOMI Video Out"
is set to "Auto". If you don't get a stable
image, select the desired resolution'
When you set "HOMI Video Out"
to a setting other than
"Auto", you can only select resolutions' that are compatible
with the
connected TV.
• Refer to "HOMI Video Out" on page 39 regarding the
resolutions
of the HOMI video output
Q
~
•
® To HDMIIN terminal
HOMI cable
(commercially available)
~NOTE
• Audio transmitted in OTS-HO High
Resolution Audio and OTS-HO Master
Audio formats
is output from the
HOMI terminal as Bitstream. Connect
an amplifier with a built-in
decoder to
enJoy the fine sound quality.
• When using an HOMI output,
7.1 ch
Digital Output is available.
G) To HDMI OUT terminal
1:1_,&"11_
QlO
Projector TV
AV receiver
After connecting
• Secure the HOMI cable to the HOMI cable holder, passing it through the holder. (Page 11)
•
If desired, connect audio equipment. (Page 17)
• If necessary, perform the Audio Video Settings. (Pages 39-40)
• Refer to AQUaS LINK function. (Pages 22 and 41)
• Load a disc and start playback. (Pages 24-32)
@- 14