Operating instructions

46
SETTINGS
The operation procedure for
inputting characters manually
NOTE
• Numeric characters such as IP address can be entered
on the input screen either by selecting each of the
characters in the “Numeric” mode or using the Number
buttons on the remote control.
IP Address
Netmask
Gateway
123
1 Press ENTER at the boxes in which characters
are to be entered, and the input screen will
appear.
Numeric
1234567890
Edit
Selected by pressing
a/b
Selected by pressing
c/d
2 Press a/b to select the desired input mode.
3 Press c/d to select a number, then press
ENTER.
4 Repeat the step 3 to display all of the desired
numbers in the input field.
Example: The screen for inputting numeric characters
Numeric
123
1234567890
Edit
NOTE
• Press j (Del.Char.) to delete a number you
have input.
• To change a number you have input, press B (Green)
(Left) or C (Yellow) (Right) to select the number you want
to change, and press j (Del.Char.). Then,
press c/d to select a new number you want to input,
and press ENTER.
5 Press D (Blue) (Complete) to fix the numbers
which have been input.
IP Address
Netmask
Gateway
123
6 Repeat step 1 to 5 to finish inputting all the
required characters.
Input character list
Numeric
1 2 3 4 5 6 7 8 9 0
Edit
Cancel Left Right Complete Del.Char.
The same operation as the coloured buttons and j can be performed by
selecting each of the items and pressing ENTER.
“Del.Char.” stands for deleting characters.
BD-HP25X_en.indd 46 2011/01/19 12:06:40