Manual

Playback Functions
If multiple angles are recorded, you can switch
between them.
1 Press FUNCTION during playback.
• The Function Control screen is
displayed on the T_.
_,!!!!!!!
2
Press A/Y to select the Angle
Number column, then press ENTER.
3
4
Press A/V to select the desired
Angle Number, then press ENTER.
• ,,_. is displayed if a disc is recorded
with only one angle.
Press o_'_ RETURN or FUNCTION
to close the Function Control
screen.
NOTE
,' Settings for audio and subtitles carl be changed
also in Function Control Screen (Page 32).
,, The operations of subtkles, angle and audio differ
according to each disc. You may need to refer to
the operation manual of the disc.
,, The following operations will not work when playing
back an audio CD:
Slow Playback, Frame Advance
Display of functions
The display for subtitles, angle or audio
automatically disappears after 5 seconds.
Switching between functions
You can switch the subtitles and audio at the
Function Control screen (Page 32),
The operation for each function varies depending
on the disc. See the manual for the disc.
Fast Forward/Reverse
You cannot perform Fast Forward/Fast Reverse
between titles, At the end or beginning of the title,
Fast Forward/Fast Reverse will be cancelled and
normal playback will automatically resume,
Subtitles are not played back with BD/DVD video
discs during Fast Forward and Fasl Reverse.
Depending on the disc and the scene being played
back, the Player may not operate at the speed
listed in this manual when performing Fast Forward.
Slow Playback
You cannot perform Slow Playback between
titles. At the end of the title, Slow Playback will be
cancelled and normal playback will automatically
resume.
Repeat Playback
,, Repeat Playback may be forbidden depending on
the disc.
,, Partial Repeat Playback may not work in multi--
angle scenes.
,, For Partial Repeat Playback, set the start and end
points within the same title.
NOTE
,' The displayed items vary depending on the disc.
,, Ifyou access the Function Control screen during
playback of a BD/DVD video, it may be impossible
to operate the BD/DVD video playback. In cases
like this, close the Function Control screen.
You can change settings so that Angle Mark
appears in the right bottom part of the screen
when multiple angles are recorded. (The
Angle Mark is only displayed for DVD video.)
The settings can be changed in "SEqq-INGS"
- "PLAYBACK SEqq-ING" - "ANGLE MARK
DISPLAY" (Page 36).
(_ - 30