Manual

Before Starting Playback
Press POWER on the remote control or
on the Player to turn on the power of the
Player.
HELLO j
Press POWER on the remote control or
on the Player to enter standby.
• If you press POWER again immediately after
entering standby, the Player may not turn on, Ifthis
happens, wait for 10 seconds or more and then
turn on the power again.
NOTE
When the STANDBY indicator is blnking (may take
some time), the Player cannot be turned on.
POWER
2
Press SETUP to display the SETUP
MENU screen.
II 1-- IIU
Press A/T/41/I_ to select "ON
SCREEN LANGUAGE", then press
ENTER.
3 Press A/Y to select the language
you want to display on the screen,
then press ENTER.
BD/DVD/CD mode indicator
ON indicator
?
STANDBY indicator
ON indicator
NOTE
_' 1o seleet the DVD disc Janguage, such as subtitle
language, etc. see page 25.
I Green on ! Power on
STANDBY indicator
J Red blinks t Preparing for standby
Red on Standby
BD/DVD/CD mode indicator
Off No disc
Blue on Playing back
White on Disc stopped
White blinks Loading a disc
When youturn on the POWER,the MENUscreen
automaticallydisplaysfor a while,
PressEXITto erasethe display,
(_- 22