Manual

SETTI

TV ASPECT RATIO

• If you switch your 77/(i.e. because you have bought a new one) and the screen aspect ratio of the

connected TV changes, you will have to change the "TV ASPECT RATIO" setting.

• You can set the screen aspect ratio of the connected TV, and adjust the video output.

Select "TV ASPECT RATIO" from "AUDIO VIDEO SETTINGS".

WIDE 16:9: Select this

when connecting to a

77/with a 1G:9 screen

aspect ratio.

NORMAL 4:3: Select

this when connecting to

a TV with a 4:3 screen

aspect ratio.

LETTER BOX: If you connect to a 77/with a screen aspect

ratio of 4:3 and playback a DVD with 16:9 video, the

video will be played back with black bands at the top and

bottom while maintaining the 16:9 ratio.

PAN SCAN: If you connect to a TV with a screen aspect

ratio of 4:3 and playback a DVD with 16:9 video, the video

will be played back with the left and right sides of the

image cut off to display in 4:3 screen aspect ratio. (This

function works if the disc is labelled for 4:3PS.)

COMPONENT VIDEO OUT

• This sets the resolution of the component video output.

Some TV are not fully compatible with the Blu-ray disc player, which may cause the image distortion. In this

case, press "COMPONENT RESET" on the remote control for five seconds. Component video out will be

reset to 480i (factory preset value).

Caution: HDMI output and Component output can not be used at the same time.

HDMI VIDEO OUT

• This sets the resolution of the HDMI video output.

Caution: HDMI output and Component output can not be used at the same time.

NOTE

" When the BD player is connected to a 1080p 24Hz compatible TV and the HDMI VIDE(] OUT is set to AUTO, 1080p

24Hz will automatically be displayed when compatible discs are played back.

WIDE 1G:9

NORMAL 4:3

LETI-ER BOX,

PAN SCAN

1080i, 720p,

480p, 480i

AUTO,

1080p, 1080i,

720p, 480p

==@

(_ - 33