User's Manual

1. This function help carry away the accumulated

dirt, bacteria, etc from the evaporator.

2. This function will run about 30 minutes, and it will return to the

pre-setting mode .You can press to cancel this function during

the process. You will hear 2 beeps when it's finished or cancelled.

3. It's normal if there are some noise during this function process,

as plastic materials expand with heat and contract with cold.

4. We suggest operating this function in the following ambient

condition to avoid certain safety protection features.

5. We suggest operating this function per 3 months.

OPERATING INSTRUCTIONS

SELF-CLEAN function

Room temp

Outdoor temp

Temp<30

5 <Temp<30

Press OPTION at the first time while air conditioner is turned off,

select the CLEAN by pressing the button or until symbol

is flashing; Press OPTION again to activate the CLEAN function,

and appears on the display.Do it again to deactivate this

function.

CLEAN

8 heating function

8 H

1.Press OPTION at the first time , select the 8 H by

pressing the button or until symbol 8 H

is flashing; Press OPTION again to choose the

8 heating function, and appears on the display.

Do it again or change the mode to deactivate this function.

2.If the air conditioner is standby, this function enable the

air conditioner automatically start heating when the

indoor temperature is equal or lower than 8 , it will return

standby if the temperature is equal or higher than 18 .

8 H

It can be set in Cool/Heat/Dry/Fan/Auto mode,

but you need to turn off the unit to activate it.

This function helps carry away the accumulated dirt,

bacteria,etc from the indoor hear exchanger.

CLEAN