Specifications

7) Distance from the top of inner tubeti oil level.
Approx. 454 mm (17.9 in)
without spring
4. REAR SUSPENSION
1) Type
Swing arm
2) Damper type
Oil damper, coil spring
3) Shock absorber travel
80 mm (3.15 in)
4) Shock absorber spring
Set length
201 mm (7.91 in)
Free length
226 mm (8.90 in)
Wire diameter x winding diameter
7.5 mm x 60.5 mm 10.295 x 2.382 in)
5) Swing arm free play (Limit)
1 mm (0.04 in)
6) Pivot shaft -Outside diameter
16 mm (0.63 in)
5. FUEL TANK
1) Capacity
15 lit (4.0 USgal)
21 Fuel grade
Regular gasoline (90 octane)
6. WHEEL
1) Type (Front and rear)
Aluminum run
2) Tire size (Front)
3.50H19.4PR
(Rear)
4.00H18.4PR
31 Tire pressure:
Normal riding (Front)
1.6 kg/cm’ (22 psi)
(Rear) 2.0 kg/cm2 (28 psi) Refer to PAGE 10
4) Rim run out limit (Front and rear)
Vertical
2 mm (0.08 in1
Lateral
2 mm (0.08 in)
5) Rim size (Front)
1.85-19 in
(Rear)
2.1518 in
6) Bearing type
Front wheel (Left)
6303RS
Front wheel (Right)
6303RS
Rear wheel (Left)
63052
Rear wheel (Right)
63042
7) Oil seal type
Front wheel (Lettl I.D.xO.D.x Width
SD0 45x56~6 mm (1.771x2.205x0.236 in)
Front wheel (Right)
”
SD 28x47~7 mm (1.102x1.850x0.276 in1
Rear wheel (Left)
”
SD 35x62x9 mm (1.378x2.441x0.354 in)
Rear wheel (Right)
”
SO 27x52x5mm (1.063x2.047x0.197 in)
8) Secondary drive chain type
Type
50HDS
Number of links
103L + Joint
Chain pitch
15.875 mm (518 in1
Chain free play
20 mm (314 in)
Property of www.SmallEngineDiscount.com - Not for Resale