Specifications

IO. VALVE SPRING
1) Free length
2) Spring rate (kg/mm)
3) Installed length (Valve closed)
4) Installed pressure (Valve closed)
5) Compressed length (Valve open)
6) Compressed pressure (Valve open)
7) Wire diameter
8) Winding O.D.
9) Number of windings
INNER (IN/EX): 42 mm (1.654 in)
OUTER (IN/EX): 42.55 mm (1.675 in)
INNER IIN/EX): ki = 1.43
kz = 1.61
OUTER (IN/EX): kl = 3.2
k> = 4.18
INNER (IN/EX): 35 mm (1.378 in)
OUTER (IN/EX): 37 mm (1.457 in)
INNER (IN/EX): 10f 0.7 kg (22.0* 1.5 lb1
OUTER (IN/EX): 17.7 + 1.25 kg (39.0 * 2.6 lb)
INNER IIN/EX): 25.5 mm (1.004 in)
OUTER (INIEXI: 27.5 mm (1.083 in)
INNER IIN/EX): 27.2 * 1.9 kg (60.0 + 4.2 lb)
OUTER (IN/EX): 57.4 + 4.0 kg (126.5 + 8.8 Ibl
INNER (IN/EX): 2.9 mm (0.114 in)
OUTER (IN/EX): 4.2 mm 10.165 in)
INNER (IN/EX): 19.4 mm (0.764 in)
OUTER (IN/EXI: 32.6 mm (1.283 in)
INNER (IN/EX): 6.0 turns
OUTER (IN/EX): 4.25 turns
Il. CRANKSHAFT
1) Crankshaft deflection limit
(A)
2) Conwd large end clearance
(B)
3) Width of crankshaft
(C)
0)
4) Crank pin I.D.
5) Crank pin O.D. x length
12. CONNECTING ROD
1) Big end I.D.
2) Small end I.D.
13. CRANK BEARING
11 Size
Right end I.D. x O.D. x Width
Others
I.D. x O.D. x Width
2) Oil seal type/size (I.D. x O.D. x Width)
14. CLUTCH
1) Clutch type
2) Clutch operating mechanism
3) Primary reduction ratio and method
4) Primary reduction gear back lash
Tolerance
5) Friction plate
Thickness/Quantity
Wear limit
6) Clutch plate
Thickness/Quantity
Warp limit
0.05 mm (0.002 in)
0.15 - 0.4 mm 10.0059 - 0.0157 in)
66$$ mm 12.5981rJ:po4
0 002 in)
166_&
mm (7.323_&,t2 in)
26:g:‘d: mm (1.024:$$: in)
262., x 65::;: mm (1.024_&,,2 x 2.559-q:% in)
34+t016 mm (1.339+$oM)6 in)
2O:g:j:g mm (0.787$“$jM in)
30 x 70 x 19 mm (1.16 x 3.07 x 0.75 in)
32 x 68 x 17 mm (1.26 x 2.69 x 0.67 in)
SD25 x 40 x 9.0 mm (0.984 x 1.575 x 0.354 in)
Wet, multiple type
Inner push type, screw push system
72127 (2.666). spar gear
0.05 - 0.08 mm (0.0020 - 0.0031 in)
3 mm (0.118 in)/7 pcs.
2.7 mm (0.106 in1
1.4 mm 10.055 in)/6 pcs.
0.05 mm (0.002 in)
-6.5 -
Property of www.SmallEngineDiscount.com - Not for Resale