Specifications

7.3. SPECIFICATION
A. General
1.
1
2.
MODEL
1) Model
(I.B.M. No.)
2) Frame I.D. and starting number
3) Engine I.D. and starting number
DIMENSION
1) Overall length
21 Overall width
3) Overall height
4) Seat height
51 Wheelbase
61 Minimum ground clearance
3. WEIGHT
B.
Engine
1. DESCRIPTION
1) Engine type
2) Engine model
3) Displacement
4) Bore
x stroke
5) Compression ratio
61 Starting system
7)
Ignition system
8) Lubrication system
2. CYLINDER HEAD
1) Combustion chamber volume (with N-7Y)
2) Combustion chamber type
3) Head gasket thickness
3. CYLINDER
1) Material
2) Bore size
3) Taper limit
4) Out of round limit
4. PISTON
1) Piston skirt clearance
21 Piston oversize
3) Piston pin outside diameter x length
5. PISTON RING
1) Piston ring design
ITOP)
(2nd)
(Oil
ring)
2) Ring end gap
(Installed. top
(Installed. 2nd
(Installed, oil)
3) Ring groove side clearance
(TOP)
(2nd)
XS650E (2FO)
2FO-000101
ZFO-000101
2,180 mm (85.8 in)
835 mm (32.9
in)
1,160 mm (45.7 in)
815 mm (32.1 in)
1,435 mm (56.5
in)
150 mm ( 5.9 in)
212 kg (467
lb)
26°
2,500 mm (98.4 in)
14 m @ 50 km/h (45.9 ft @ 31 mi/h)
Air cooled, 4-stroke. SOHC twin. parallel forward
incline
2F0
653 cc (39.85 cu.in)
75
x 74 mm (2.953 x 2.913 in)
8.5 : : 1
Kick and electric starter
Battery ignition
Wet sump
44.18 cc (2.696 cu.in)
Dome + Squish
1.2 mm (0.047 in)
Aluminum alloy with cast iron sleeve
75.00f~.02 mm (2.9528+~Ooo8 in)
0.05 mm (0.002 in)
0.01 mm (0.0004 in)
0.050
~ 0.055 mm (0.0020 ~ 0.0022 in1
75.25 mm 75.50 mm 75.75 mm 76.00 mm
12.963 inl 12.972 in, 12.982 in, l2.992 in1
20.0_~,005mm x 61.0
& mm
(0.79mg,M)02 in x 2.40
-to115 in)
Barrel ring 1.2 mm (0.047 in)
Taper ring 1.5 mm (0.059 in)
With expander 2.8 mm (0.110 in)
0.2
- 0.4 mm 10.008 - 0.016 in)
0.2 - 0.4 mm (0.008 - 0.016 in)
0.3
- 0.9 mm (0.012 - 0.036 in)
0.04
- 0.08 mm (0.0016 - 0.0031 in)
0.03
- 0.07 mm (0.0012 - 0.0028 in)
Property of www.SmallEngineDiscount.com - Not for Resale