Specifications

4. Joint the chain together and revet a new
link.
5. Install the cam chain tensioner, and adjust
chain tension. Refer to PAGE. (8).
6. Make sure the timing is correct.
M. Cylinder heed cover
1. Install all components in the head cover.
2. Apply Yamaha No. 4 sealant to cover
mating surfaces.
3. Install all head cover retaining nuts and
bolts and thread them down until lightly
seated.
4. Tighten them with torque wrench in the
order given
N. Governor and breaker assembly
Reverse the governor and breaker removal
sequence.
NOTE:
Before inserting the governor rod, supportive
bearings should be lubricated with molyb-
denum disulfide.
O. Engine
11
1. 4 5 (M10).5.0 m-kg (36 ft-lb)
Property of www.SmallEngineDiscount.com - Not for Resale