Specifications

3) Bearing: Main axle (Left)
(Right)
Drive axle (Left)
(Right)
41 Oil seal type Drive axle (Left)
5) Secondary reduction ratio and method
16. SHIFTING MECHANISM
1) Tvpe
2) Oil seal type (Change lever)
17. KICK STARTER
11 Type
2) Oil seal type (Kick axle)
3) Kick clip friction tension
18. INTAKE
1) Air cleaner: Type/Quantity
2) Cleaner cleaning interval
19. CARBURETOR
1) Type and manufacturer/Quantity
2) I.D. mark
3) Main jet
(M.J.)
4) Air jet (A.J.)
5) Jet needle (J.N.1
6) Needle jet
(N.J.)
7) Throttle valve 1Th.V)
8) Pilot jet (P.J.)
9) Pilot screw (Turns out) (P.S.1
10) starter jet (G.S.1
11) Fuel level (F.L.1
12) Idling engine speed
20. LUBRICATION
1) Engine rump oil quantity
2) Oil type and grade
3) Oil pump type
4) Trochoid pump specifications
Top clearance
Tip clearance
Side clearance
Oil pump volume
5) Bypass valve rening pressure
Needle bearing 1020.+30-20)
Ball bearing ($25.$52-20.6)
Ball bearing (4 30. $662-23.8)
Needle bearing (@20- $30-161
SDD-40.62.9
34117 (2,0OO)/Chain
Cam drum, return type
SDO-14-24-6
Bendix type
SD-25-35-7
1.2 - 1.7 kg (2.6 - 3.7 lb)
Dry. foam rubber/2 pa.
Every 8,000 km 15.000 mile)
8534MIKUNI12 per.
3GlM)
gl32.5
#85
5HX12
Y.0
#135
#42.5
Preset
#30
27.3 ? 0.5 mm 11.075 + 0.020 in)
1,200 rlmin
Oil exchange: 2.0 lit 12.1 US qt)
Overiwl: 2.5 lit (2.6 US qt)
Yarn&be 4.cycle oil or SAE 2OW/40 type
“SE” motpr oil
Trochoid pump
O.lO- 0.18 mm (0.0039- 0.0071 in)
0.03- 0.09 mm 10.0012- 0.0035 in)
0.03- 0.08 mm (0.0012-0.0031 in)
1.3 litlmin (1.37 qtlmin) at 1,000 rlmin
1.0 kg/cm’114 psi)
- 178-
Property of www.SmallEngineDiscount.com - Not for Resale