Specifications

*ELECTRICAL
A. IGNITION SYSTEM
1 Rlneb r4irrnram
1
protective circuit
2. Description
This model is equipped with a battery
operated, fully transistorized breakerless
ignition system. By using magnetic pick-
up coils the need for contact breaker
points is eliminated. This adds to the
dependability of the system by eliminat-
ing frequent cleaning and adjustment of
points and ignition timing. This TCI
unit incorporates an automatic advance
circuit controlled by signals generated by
the pick-up coils.
This adds to the
dependability of the system by eliminat-
ing the mechanic advancer.
This TCI
system consists of two main units; a
pick-up unit and an ignitor unit.
3. Operation
The TCI functions on the same principle
as a conventional DC ignition system
with the exception of using magnetic
pick-up coils and a transistor control box
(TCI) in place of contact breaker points.
a. Pick-up unit
1. Pick-up unit
This unit consists of two pick-up coils
mounted on the generator case and a
permanent magneto on the rotor which
is mounted to the crankshaft. When the
magneto passes through these pickup
coils, the signals are generated at the
pick-up coils and forwarded to the
ignitor unit as a signal.
The full ignition advance is determined
by the distance (or angle) between two
pick-up coils.
b. lgnitor unit
1. lgnitor unit (T.C.I. unit)
This unit has such functions of wave
form, duty control, switching, and elec-
trical ignition advance.
The ignition
timing is advanced electrically using two
signals from the pick-up coils.
The duty control circuit is provided to
control the on time period of the pri-
mary ignition
current to reduce the
electrical consumption.
This unit also
incorporates a protective circuit for the
ignition coil.
If the ignition switch is
- 170-
Property of www.SmallEngineDiscount.com - Not for Resale