Specifications

3) Bearing type: Main axle (Left1
(Right1
Dr,ve axle (Left)
(Right1
4) Oil seal type Drive axle (Left1
5) Secondary reduction ratio and method
16. SHIFTING MECHANISM
1) Type
21 Oil seal type (Change lever)
17. KICK STARTER
1) TYPE
2) Oil seal type (Kick axle)
3) Kick clip friction tension
18. IFITAKE
1) Air cleaner: Type/Quantity
2) Cleaner cleaning interval
19. CARBURETOR
1) Type and manufactureriDuantitY
2) I.D. mark
31 Main jet
(MJI
4) Air jet
(AJ)
5) Jet needle
(JNI
61 Needle jet
(NJ1
7) Throttle valve (Th.VI
6) Pilot jet
IPJ)
9) Pilot screw (Turns out)
(PSI
101 Starter jet
IGS)
11) Fuel level
(FL1
20.
12) Idling engine speed
LUBRICATION
11 Engine sump oil quantity
21 Oil type and grade
31 Oil pump type
4) Trochoid pump specifications
Top clearance
Tip clearance
Side clearance
Oil pump volume
51 Bvoass valve settina pressure
Needle bearing (@20~@30-201
Ball bearing (0%052-20.61
Ball bearing l@30-062-23.8)
Needle bearing (020.$30-161
SDD-40-62-9
34117 ~2.0OOllChain
Cam drum, return type
SDO.14.24-6
Bendix type
SD.25.35.7
1.2 - 1.7 kg (2.6 - 3.7 lb)
Dry. foam rubber/2 pa.
Every 6,000 km (5.000 mile)
ES36 MIKUNl/Z pcs.
ZFO-00
#135
#140
502.3
z-2
#120
r127.5
Preset
GS, : #80, GSz : 0.5
24 + 1 mm (0.94 to.04 in)
1,200 rlmin
Oil exchange: 2.0 lit 12.1 US qt)
Overhaul: 2.5 lit (2.6 US qtl
Yamalube 4~cycle oil or SAE 2OWl40 type
“SE” motor oil
Trochoid pump
0.10- 0.16 mm IO.0039 -0.0071 in)
0.03 - 0.09 mm 10.0012 - 0.0035 in)
0.03 - 0.08 mm (0.0012 - 0.0031 in1
1.3 litlmin (1.37 qtlmin) at 1,000 rImin
1.0 kg/cm’ (14 psi)
- 152-
Property of www.SmallEngineDiscount.com - Not for Resale