Installation guide

(_0Secure EXHAUST DUCT BOTTOM to the shelf with 2 SCREWS (B) as shown in Figures 8-B.

Figure 8-B

STEP 9: FRAME ASSEMBLY INSTALLATION

_0 Attach FRAME ASSEMBLY and tighten 4 SCREWS (C) as shown in Figure 9 and Figure 9-A.

SCREW (C)

SCREW (C) . ASSEMBLY

i /

BOTTOM PANEL of _-'--_" Figure 9-A

FRAME ASSEMBLY Figure 9

Pull bottom panel of FRAME ASSEMBLY toward you to remove or replace the drip tray.

For any other assistance or information about this product, please call SHARP's Customer Assistance Cen-

ter 1-800-BE-SHARR

SHARP ELECTRONICSCORPORATION

SharpPlaza, IVlahwah,NJ 07495-1163