Owner manual

LtJJiB LJiy 0JLNJ yji 1

_________

The following situations are normal and are not signs that the oven is malfunctioning.

QUESTION / SITUATION ANSWER

Control panel /

power supply

The display is black / blank. * Check that power plug is connected to a suitable wall

outlet. See page 4.

* Check that fuse or circuit breaker is functioning properly.

It not, correct.

* Disconnect the oven from the power source, wait one

minute and then plug into the wall outlet. It the problem

exists, consult a Sharp Authorized Servicer.

The display is fine but START

will not function when pressed.

* Open the door and close. Is the oven light oft? Press

START again.

* It the display says, "Wait. Oven is too warm to use.", be

sure to wait until it disappears and then press START.

Electrical power supply is

interrupted during cooking.

The cooking program will be cancelled. Continue to cook

with manual operation. Check food carefully as it cooks.

Oven light is oft during PROOF. Normal operation to prevent bread dough from drying on

the surface.

Oven light is off during

descaling.

This is normal operation. See page 15.

Oven light is oft when door is

opened.

Oven light will turn OFF if the door is open for more than 5

minutes.

The display backlight is oft. Sleep Mode may be ON. Press any pad, turn the Dial or

open/close the door to activate display backlight. See page

35 to cancel Sleep Mode.