User guide

Getting started
Press the dirt container
release button. Pull and
remove the dirt container
o the vacuum cleaner.
Make sure the tabs on the
pre-motor lter are visible
when re-tting the pre-motor
lter and assembly into the
dirt container.
Lift the handle on the
pre-motor lter assembly.
Remove the lter assembly
from dirt container.
Tilt dirt container and line
up onto main body of
vacuum cleaner. Push
dirt container back until
it clicks into place.
Push the handle into
the body of the vacuum
cleaner. The handle will
click into position when
correctly tted.
Assembling your vacuum cleaner
CAUTION: The motor is contained in the dirt container lid, always make sure the pre-motor lter is correctly tted before
using the vacuum cleaner. Loss of suction may be experienced if the lter insert is not removed before use.
Fit the battery onto the
vacuum cleaner (below the
dirt container). The battery
will click into position when
correctly tted.
TIP
You may want to charge
the spare battery
so it’s ready to use.