User guide

Let’s talk technical
Using a dry cloth or soft dusting brush
remove any dust/debris from terminals
on battery charger, battery and vacuum cleaner.
Cleaning terminals
Clearing a blockage from the brushbar
IMPORTANT: If the brushbar has been obstructed, the Motor Protection Sensor may have been activated.
Remove the battery and dirt container and clear any obstruction from the brushbar.
Wait 30 minutes for the vacuum cleaner to reset itself.
Replace the battery and dirt container. Roll the On/O brushbar control forward to carpet mode.
Remove battery and lie the
vacuum cleaner at. Squeeze
the clips on the brushbar
cover towards the brushbar
and lift o brushbar cover.
Using a pair of scissors cut
any hair or debris from
around the brushbar.
Replace the brushbar cover
by clicking into place.