User guide

Taking care of your machine Let’s talk technical
Emptying and cleaning the dirt container
Cleaning the separator and pre-motor lter
Press the dirt container
release button. Pull and
remove the dirt container
o the vacuum cleaner.
Lift the handle on the
pre-motor lter assembly.
Remove the lter assembly
from dirt container.
MAX
40˚C
T
A
P
24hr
Hold the dirt container over
a bin, press the dirt release
button to open, allow the dirt
to fall out.
Pull the lter tab
and remove the lter
out of the lter assembly.
Tap the lter over a bin
to remove any dirt/debris.
Wash the lter under
running water
(40 degrees max).
Leave for 24hrs or until
fully dry before replacing.
Lift and remove separator
out of dirt container. Using
a soft brush remove any
dirt/debris from separator.
MAX
40˚C
T
A
P
24hr
TIP
Don’t over ll the dirt container
to avoid blocking the air ow
through the vacuum cleaner and
replace lter every 6 months
depending of level of use.
Damaged or discoloured lters
need replacing.
CAUTION: Do not use your vacuum cleaner with a clogged lter and without the lter in place. For best cleaning results
lters require cleaning every 4-6 uses or as needed.