User guide

Using your machine Using your machine
Using the hose with the main body attached
CAUTION: Constant use of the boost button will reduce the battery running time.
Always switch o the vacuum cleaner before connecting or disconnecting any tools.
Do not use the vacuum with base and main body attached to clean stairs.
Remove the hose from the
side of the vacuum cleaner
by pressing the hose end
clip and pulling hose
out of the hose entry point.
Choose an accessory.
Attach tool to the end of
the extension tube.
Press handle release clip
and lift to remove handle.
When using the hose make
sure the vacuum is secure
by holding the handle on top
of the dirt container.
Attach the hose to the
handle, clipping the hose
end clip over the indented
ridge on the entry point.
Press the On/O button
to switch the vacuum
cleaner on.
Press the Boost button
for increased suction when
using tool attachments.
Replace handle and clip
hose end clip into the
side of vacuum cleaner
after use.