Instruction Manual

TIME ZONE SETTING
The default time zone is PACIFIC. If your location is not in
the Pacific, set the time zone as follows:
1. Press the “TIME”button once, this enters the
alarm time mode. You will see the Month / Date area
change to the Alarm area.
2. Press the “UP” button to select the proper time zone:
P=Pacific M=Mountain C=Central E=Eastern.
3. Press the “TIME” button to save the setting and
return to normal time mode.
TIME AND CALENDAR SETTING
If you are out of reach of the Radio Controlled transmitter or
if the reception is not reachable, the time and calendar can
be set manually. As soon as the transmitter signal is
received again, the clock will automatically synchronize with
the exact time and calendar.
1. Press and hold the “TIME” button on the back of the
clock for 2 secorids until the Year digits flash.
2. Press the “UP” or “DOWN” button to change its value.
3. Press the “TIME” button once until the Month digit
flashes.
4. Press the “UP” or “DOWN” button to change its value.
5. Repeat the above operations (point 3, 4) to set the
below items in this order: Date > Hour > Minute >
Second > Day Language > +/-23 hours time difference.
6. Press the “TIME” button to save and exit the setting
mode, or let it exit automatically 30 seconds
later without pressing any key.
NOTE:
1. Through “+/-23 hours time difference” setting, the
precise time of another area will be shown.
2. The 5 weekday Language options are represented
by the below abbreviations: GB=English FR=French
DE=German ES=Spanish IT=ltalian.
English
French German
Spanish
Italian
SUN
DIM SON DOM
DOM
MON
LUN
MON LUN
LUN
TUE
MAR
DIE
MAR
MAR
WED MER MIT
MIE MER
THU JEU
DON
JLIE
GIO
FRI
VEN
FRE
VIE
VEN
SAT SAM SAM SAB
SAB
ALARM TIME SETTING
1. In normal time mode, press the “TIME” button to
enter the alarmi (alarm2) time mode.
2. Press and hold the “ALM ON/OFF” button for 2
seconds until the alarm Hour digit flashes.
10