Operation Guide GB
Table Of Contents
- CONTENTS
- INTRODUCTION
- USING THE MANUAL
- DIFFERENCES BETWEEN MODELS
- SETUP
- BEFORE USING THE MACHINE
- COPY FUNCTIONS
- PRINTER FUNCTIONS
- BASIC PRINTING
- PRINTER DRIVER SETTING SCREEN
- SETTING ADVANCED PRINT FUNCTIONS
- PRINTING MULTIPLE PAGES ON ONE PAGE (N-Up Printing)
- FITTING THE PRINTED IMAGE TO THE PAPER (Fit To Paper Size)
- ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180 degrees)
- ENLARGING/REDUCING THE PRINT IMAGE (Zoom)
- PRINTING FAINT TEXT AND LINES IN BLACK (Text To Black/Vector To Black)
- ADJUSTING THE BRIGHTNESS AND CONTRAST OF THE IMAGE (Image Adjustment)
- ADDING A WATERMARK TO PRINTED PAGES (Watermark)
- TWO-SIDED PRINTING (Model that has duplex copy / print function as standard feature only)
- SAVING FREQUENTLY USED PRINT SETTINGS
- OUTLINE OF THE PRINT STATUS WINDOW
- BASIC PRINTING (MACINTOSH)
- SCANNER FUNCTIONS
- USER SETTINGS
- TROUBLESHOOTING
- ROUTINE MAINTENANCE
- APPENDIX
- WEB FUNCTIONS IN THE MACHINE
- ABOUT THE WEB PAGES
- CHECKING THE IP ADDRESS IN THE WEB PAGE
- ABOUT THE WEB PAGES (FOR USERS)
- CONFIGURING THE PRINTER CONDITION SETTINGS
- ABOUT THE WEB PAGES (FOR THE ADMINISTRATOR)
- PROTECTING INFORMATION PROGRAMMED IN THE WEB PAGE ([Passwords])
- ADMINISTRATOR SETTINGS
- SSL SETTINGS
- E-MAIL STATUS AND E-MAIL ALERT SETTINGS
77
4
BASIC PRINTING (MACINTOSH)
l AR-6020/AR-6023/AR-6020D/AR-6023D
The network expansion kit and the PS3 expansion kit must be installed and the machine must be connected to a
network.
l AR-6020N/AR-6023N/AR-6026N/AR-6031N
The printer expansion kit and the PS3 expansion kit must be installed and the machine must be connected to a
network.
Before printing, make sure that the correct size of paper for your document has been loaded in the machine.
1
Start the application and open the
document that you wish to print.
2
Select "Print" from the application's
"File" menu.
3
Make sure that the correct printer is
selected.
4
Select print settings.
Click and select the settings that you wish to
configure from the pull-down menu. The
corresponding setting screen will appear.
[
5
Click the "Print" button.
Printing begins.
•
The machine name that appears in the
"Printer" menu is the name that was entered
when the settings were configured from the
"Software CD-ROM". Unless the name was
changed when configuring the settings, it will
be "AR-xxxx" (where "xxxx" is a sequence of
characters that varies depending on your
machine).
• The Print window varies depending on the
operating system version, the printer driver
version, and the application.
AR
Note
The settings vary depending on the operating
system version, the printer driver version, and
the application.
AR
Note
AR