Operation Guide GB
Table Of Contents
- CONTENTS
- INTRODUCTION
- USING THE MANUAL
- DIFFERENCES BETWEEN MODELS
- SETUP
- BEFORE USING THE MACHINE
- COPY FUNCTIONS
- PRINTER FUNCTIONS
- BASIC PRINTING
- PRINTER DRIVER SETTING SCREEN
- SETTING ADVANCED PRINT FUNCTIONS
- PRINTING MULTIPLE PAGES ON ONE PAGE (N-Up Printing)
- FITTING THE PRINTED IMAGE TO THE PAPER (Fit To Paper Size)
- ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180 degrees)
- ENLARGING/REDUCING THE PRINT IMAGE (Zoom)
- PRINTING FAINT TEXT AND LINES IN BLACK (Text To Black/Vector To Black)
- ADJUSTING THE BRIGHTNESS AND CONTRAST OF THE IMAGE (Image Adjustment)
- ADDING A WATERMARK TO PRINTED PAGES (Watermark)
- TWO-SIDED PRINTING (Model that has duplex copy / print function as standard feature only)
- SAVING FREQUENTLY USED PRINT SETTINGS
- OUTLINE OF THE PRINT STATUS WINDOW
- BASIC PRINTING (MACINTOSH)
- SCANNER FUNCTIONS
- USER SETTINGS
- TROUBLESHOOTING
- ROUTINE MAINTENANCE
- APPENDIX
- WEB FUNCTIONS IN THE MACHINE
- ABOUT THE WEB PAGES
- CHECKING THE IP ADDRESS IN THE WEB PAGE
- ABOUT THE WEB PAGES (FOR USERS)
- CONFIGURING THE PRINTER CONDITION SETTINGS
- ABOUT THE WEB PAGES (FOR THE ADMINISTRATOR)
- PROTECTING INFORMATION PROGRAMMED IN THE WEB PAGE ([Passwords])
- ADMINISTRATOR SETTINGS
- SSL SETTINGS
- E-MAIL STATUS AND E-MAIL ALERT SETTINGS
43
BEFORE USING THE MACHINE
2
1
Perform steps 1 to 5 of "CHANGING A
TRAY'S PAPER SIZE SETTING" (p.41),
and select the tray whose paper type
you want to change.
2
Press the [Copy ratio] key ( , ).
The light of the tray selected for the paper type
setting will blink, and the ratio display will change
as follows.
* For the difference between Heavy 1 and Heavy 2,
refer to "PAPER" (p.38).
3
After pressing the [START] key ( ),
press the [PAPER] key to exit the
settings.
To change the paper size
setting of another tray,
repeat steps 2 to 5 after
pressing the [START]
key ( ).
Envelope display
OPERATION IN COPY, PRINTER,
AND SCANNER MODES
Some operations cannot be performed simultaneously when the machine is being used in printer mode, copy mode,
or scanner mode.
Ratio display Paper type
Off Standard paper
Thin paper
Heavy paper 1*
Heavy paper 2*
to
Envelopes
For the ratio display
and envelope types,
refer to “Envelope
display”.
Labels
Transparency film
Only plain paper, recycled paper and thin
paper can be set for paper trays 1 to 4.
Note
Ratio display Envelope types
Monarch
Com-10
DL
Envelope Chou 3
YOKEI-2
Kaku-2
kaku-3
YOKEI-4
Modes Copying Printing
Scanning from a
computer
Scanning from
the machine
Copy
Copy key input Ye s Ye s Ye s N o
During copying No No No
Printer During printing Ye s Ye s Ye s
Scanner
During scan preview/
during scanning
No Yes