Operation Guide GB

38
LOADING PAPER
The paper display blinks, and the display of the paper tray that ran out of paper blinks. or when the selected paper
tray is not installed or is improperly installed.
PAPER
For best results, use only SHARP recommended paper.
*
1
When making a large number of copies or prints using more than 90 g/m
2
(24 lbs.) paper, remove the output from the paper
output tray when about 100 pages have been printed. The output may not stack correctly if more than 100 pages are allowed
to accumulate.
*
2
The number of sheets of the paper which can be set changes with the weight of a paper.
*
3
Thin paper cannot be used for two-sided copying.
*
4
Bypass tray is not supported for two-sided copying.
Special papers
Follow these guidelines when using special papers.
l Use SHARP recommended transparency film and label sheets. Using other than SHARP recommended paper
may result in misfeeds or smudges on the output. Feed each sheet one at a time using the bypass tray (do not
attempt continuous copying or printing).
l There are many varieties of special paper available on the market, and some cannot be used with this machine.
Before using special paper, contact your authorised service representative.
l Before using other than SHARP recommended paper, make a test copy to see if the paper is suitable.
Paper tray type Paper type Size Weight Capacity
Paper tray Standard paper
Recycled paper
Thin paper*
3
A5R
B5R
B5
A4R
A4
B4
A3
(5-1/2" x 8-1/2"R (Invoice))
(8-1/2" x 11"R (Letter R))
(8-1/2" x 11" (Letter))
(8-1/2" x 13" (Foolscap))
(8-1/2" x 13-1/2")
(8-1/2" x 13-2/5")
(8-1/2" x 14" (Legal))
(11" x 17" (Ledger))
55 g/ m
2
to 105 g/ m
2 *1
(15 lbs. to 24 lbs.)
250 sheets
*2
(Load paper lower
than the line on the
tray)
Paper tray
(AR-6026N/
AR-6031N)
500-sheet paper
feed unit
500 sheets
*2
(Load paper lower
than the line on the
tray)
Bypass tray*
4
Standard paper
Recycled paper
Thin paper*
3
A6R to A3
(5-1/2" x 8-1/2" (Invoice)
to 11" x 17" (Ledger))
55 g/m
2
to 105 g/m
2
(15 lbs. to 24 lbs.)
100 sheets
*2
- Load one sheet of
paper each time on
the bypass tray.
Transparency film
Labels
Heavy paper 1 A6R to A4
(5-1/2" x 8-1/2" (Invoice)
to 8-1/2" x 11" (Letter))
106 g/m
2
to 128 g/m
2
(28 lbs. to 33 lbs.)
You can load multiple
sheets of paper on
the bypass tray.
Heavy paper 2 129 g/m
2
to 200 g/m
2
(33 lbs. to 110 lbs.)
Load one sheet of
paper each time on
the bypass tray.
Envelopes International DL
(110 mm x 220 mm)
Monarch
(3-7/8" x 7-1/2")
Commercial 10
(4-1/8" x 9-1/2")
Envelope Chou 3
YOKEI-2
Kaku-2
Kaku-3
YOKEI-4
-5 sheets