Operation Guide GB

35
BEFORE USING THE MACHINE
2
DISPLAY
[ ] Maintenance indicator (p.111)
[ ] Toner cartridge replacement required
indicator (p.111)
[ ] Developer replacement required
indicator (p.111)
The number of copies display
Shows the set number of copies, system setting
function or setting code, or an error code when an
error occurs. Also, shows the program number when
the scanner function is used.
Ratio display
Shows the copy ratio.
: Auto ratio selection indicator. Appears
when the ratio has been selected
automatically.(p.48)
: Appears when XY ZOOM Copying is
used.(p.48)
Size display
Shows the placed original/paper size. The sign "R"
indicates that the original and the paper are placed in
a horizontal direction.
: When an original is placed, this shows the
orientation and size of the original.
(p.48)
: The paper orientation and size appears
when you check or set the tray paper.
(p.48)
Original detection indicator
Lights up when there is an original in the RSPF.
Original size auto detection indicator
Lights up when the original size is detected
automatically.
[ ] Misfeed indicator (p.111)
Paper tray indicator
Blinks when the tray has run out of paper.
Auto Paper select indicator
Paper of the proper size will be automatically selected
depending on the original size and selected copy ratio
when this indicator is on. (p.46)
Auto rotation indicator
Appears when rotation copy is used. (p.46)
Bypass tray indicator
Appears when the bypass tray is selected. (p.46)
Paper tray indicator
The currently selected paper tray lights up. (p.46)
Misfeed position indicator
The location where the misfeed occurred lights up.
() (p.112)
2
3
1
4
5
9
10
6
7
8
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15