Operation Guide GB

135
10
ADMINISTRATOR SETTINGS
The administrator settings are used to prohibit changes to the [Condition Settings] and to configure interface
settings.
l "Default settings" (p.135)
: Select the setting for which you wish to prohibit changes.
l "Interface settings" (p.135)
: Enable monitoring of data sent to the network port and set restrictions.
CONFIGURING A SETTING IN THE ADMINISTRATOR
SETTINGS
1
Click [Administrator Settings] in the
menu frame.
The "Default Settings" screen of the
[Administrator Settings] will appear. If you wish to
select a setting in the "Default Settings" screen,
go to step 3.
2
Click the desired setting.
3
Make a selection for the setting in the
screen that appears.
See "ADMINISTRATOR SETTINGS" (p.135) for
descriptions of the settings.
4
Click [Submit] to store the entered
information.
ADMINISTRATOR SETTINGS
When "YES, NO" appears in the "Settings" column, "YES" is selected when a checkmark appears in the checkbox of
the item, and "NO" is selected when checkmark does not appear.
Default settings
Interface settings
Item Settings Description
Prohibit Test
Page Printing
YES, NO This setting is used to prohibit printing of a printer test page.
Disable Default
Setting Changes
YES, NO This setting is used to prohibit changes to the default condition settings.
Disabling of
Clock
Adjustment
YES, NO This setting is used to prohibit changing of the date and time.
Item Settings Description
I/O Timeout 1- 60 - 999 (sec) During reception of a print job, if remaining data is not received after the
time set here elapses, the port connection is broken and the next print job
is begun.
Emulation
Switching
Auto,
PostScript, PCL
Select the printer language. When [Auto] is selected, the language is
automatically selected from the data sent to the printer. Unless errors occur
frequently, do not change the setting from [Auto] to another setting.
Port Switching
Method
Switch at End of
Job, Switch after
I/O Timeout
Select the method for switching network ports.