Service manual

D. Accessory and Options
Part name Model Q’ty Note
Accessories SCSI cable 1
Wire saddle 1
Band 1
Printer box installing screw 5
Printer control PWB 1 With frame
Printer driver Printer Driver (including PPD File) 1
Screen Font 1
Resident-FontData Install Utility 1
Printer Administration Utility ver.2.x 1
NWsetup 1
Printer Status Monitor ver.2.0 1
Integrated Installer 1
Makedisk Utility 1
Installation manual 1
Operation Manual 1
Label 1 Only for Sweden and Norway
Option SIMM memory 16MB ED0 type/Without parity/70ns or above
The copier ICU PWB requires the total
memory of 16MB(20MB) or more.
The printer control PWB has two expansion
slots to which 16MB or 32MB memory can
be additionally installed. (16MB onboard)
32MB
Network card AR-NC3D 1 10Base-T / 100Base-TX
Separate purchase
(User purchase)
Printer (parallel) cable Necessary when the copier is used as a
stand-alone machine.
E. List of the Applicable Models for the AR-PB2A Printer Expansion Kit
The details of the specifications, features, and options of the printer may vary with the printer models. Some features described in this manual may
not be available depending on the printer drivers.
Model Name AR-280 AR-285 AR-335 AR-250 AR-281 AR-286 AR-336 AR-405 AR-505 AR-287 AR-337 AR-407 AR-507
Hard disk
drive
Yes Yes Yes No
*
1
Yes Yes Yes Yes Yes Yes Yes Yes Yes
Capacity 2GB
*
2
2GB
*
2
2GB
*
2
1GB 2GB 2GB 2GB 2GB 2GB 4.3GB 4.3GB 4.3GB 4.3GB
Reverse
order printing
Yes Yes Yes No Yes No
Photo
enhancement
No No No Yes Yes Yes
Toner save/
smoothing
No Yes Yes Yes Yes Yes
Confidential
print
No No No No Yes Yes
Tandem print No No No No No Yes Yes
Status/alert
by E-mail
No No No No Yes Yes
Account
control
No No No No Yes Yes
Network
scanner
*
3
No No No No Yes Yes
*1 Optional
*2 Some units of the models may come with a 1 GB hard disk drive.
*3 Optional AR-NS1 is needed.
AR-PB1 A and AR-PB2 A are available for following models however, the available functions can vary with the copier models installed.
AR-PB2A
1 – 2