Service manual

AR-P17 SYSTEM CONFIGURATION 1 - 1
[1] SYSTEM CONFIGURATION
[2] SPECIFICATIONS
1. Basic specification
*1: 1200dpi mode print is supported only in PCL6 and PS3.
*2: Network scan needs one slot of memory (max. 256MB). When,
therefore, network scan is installed, the max. available memory for
the printer is 320MB.
*3: PDF direct print is available with PostScript.
2. Printer controller board
COPIER
ENGINE
PCL CONTROLLER
P
C
I
1
2
8
4
PC
PC
Ethernet
Option
PCI
Board
P
C
I
M
B
U
S
M
B
U
S
CPU
IO
ASIC
PCI-BUS
32bit/33MHz
10/100BaseT
USB2.0
(Full speed mode correspondence)
System-BUS
Energy-saving I/F
correspondence
L
A
N
U
S
B
Item Detail
Print Speed AR-M276/M277:
27ppm (600dpi)
13.5ppm (1200dpi)
AR-M236/M237:
23ppm (600dpi)
13.5ppm (1200dpi)
Resolution 300dpi, 600dpi, 1200dpi*1
Smoothing 1200dpi x 600dpi
Standard memory 64 MB
Expansion memory *2, 3 DIMM 1 slot
144 pin 128/256MB DIMM
Option memory 8MB flash DIMM
Toner save mode Standard
Input tray Multi Bypass tray
Tray 1, Tray 2, Tray 3, Tray 4
(Depending on conditions of the
machine and option installation.)
Duplex Print Standard
Finisher Option
NIC 10/100baseTX (Standard equipped
with TCP/IP RF NIC. Others are
optional.)
PostScript Level3 *3 Option
Bundled software Printer driver, PAU, Status monitor,
Installer, Acrobat Reader
Barcode font Option
Operation Manual Standard (Online manual)
Platform IBM PC/AT (Include compatible
machine)
Macintosh
Support OS
(Printer
Driver)
Custom PS Windows 95/98/Me
Windows NT 4.0
Windows 2000
Windows XP
Custom
PCL5e
Windows 95/98/Me
Windows NT 4.0
Windows 2000
Windows XP
Custom
PCL6
Windows 95/98/Me
Windows NT 4.0
Windows 2000
Windows XP
PPD only Windows 95/98/Me
Windows NT 4.0
Windows2000
Windows XP
MacOS 8.6 to 9.x, 10.1 or later
PDL support PCL5e, PCL6, PostScript Level 3,
TIFF, PDF
Resident
Fonts
For PS 136 Outline Fonts
For PCL5e,
PCL6
80 Outline Fonts
Line Printer
For PCL Barcode Fonts (Option)
Screen Fonts For PS 136 Outline Fonts
For PCL5e,
PCL6
136 Outline Fonts
For PCL Barcode Fonts (Option)
Processor MIPS 64bit
Base memory 64MB (Standard)
Expansion
memory
Standard: 144 pin DIMM x 1 slot
Max.: 320MB
Parallel I/F IEEE 1284 compatible x 1
USB I/F USB 2.0 (Full speed mode correspondence) x 1
Network I/F 10/100baseTX x 1
Item Detail