Service manual

AR-P17 PRINTER STATUS MONITOR/PRINTER MANAGEMENT UTILITY 8 - 4
Printer property page (Select a printer from the list and double
click it to display this page.)
[Device tab]
1) Model
2) Name: Can be set.
3) Installing place: Can be set.
4) Property:
RM size
Max. paper size
Max. print speed
Paper path
[Paper exit tab]
[Paper feed tab]
[Print setup tab]
1) Channel list: List of the effective channels
2) Paper direction: If the driver does not specify the direction, the
printer uses this direction for normal use. (No change allowed for
some models.)
3) Default PDL: If the driver does not specify any PDL, the printer uses
this PDL for normal use. (No change allowed for some models.)
4) Single/Duplex print: If the driver does not specify single/duplex
print, the printer uses this print path for normal use. (No change
allowed for some models.)
[Resource type]
1) Total Impressions: The quantity of printouts and outputs of copy
and FAX.
2) Toner status: OK or toner empty or toner low.
(Only toner empty or not is detected in some models.)
Toner Low Toner Empty
Offline Paper Jam
Paper Empty Printer Error
Cover Open Printer Warning
Specified Output Tray
Full
1) Paper exit tray for normal use:
If the driver does not specify any paper exit tray, the printer uses
this tray. No change allowed for some models.
2) List of paper output trays:
3) Description: = Tray name
Information on the
tray selected from
the list is
displayed.
4) Model name: (Not set in some models.)
5) Paper exit method: Face-up or face-down
6) Printing sequence: "First To Last" or "Last
To First"
7) Max. paper capacity: The paper presence
is detected and displayed only when the job
separator is installed.
1)
2)
3)
4)
1)
2)
3)
4)
5)
6)
7)
1) Paper feed tray for normal use:
If the driver does not specify any paper feed tray, the printer uses
this tray.
2) List of paper feed trays:
Information on the
tray selected from
the list is
displayed.
3) Description: = Tray name
4) Model name: (Not set in some models.)
5) Paper size: Length x width (mm)
6) Paper kind: Name defined by ISO/IEC
10175DPA
7) Max. paper capacity: AR-M230/M270
series detects the presence of paper only.
1)
2)
3)
4)
5)
6)
7)
1)
2)
3)
4)
1)
2)