Service manual

AR-P17 SETTING AND ADJUSTMENTS 4 - 2
PCL settings
PostScript settings
"PS setting" is allowed only when the PS expansion kit is installed.
2. AR-PK1 (PS expansion kit) setup
A. Setup content
• The soft key is supplied by registering the manufacturing number
and the model name of the machine and the application number
attached to the PS expansion kit via the Web site.
Enter the soft key to the machine, and the PS3 function can be oper-
ated.
If, however, the setup enable conditions are not satisfied, inputs are
disabled.
• When the soft key is erroneously inputted:
When the function lock is canceled: the function lock turns to work.
When the function lock is working: the function lock is kept working.
B. Setup enable conditions
• The printer expansion kit (including the standard equipment) should
be installed.
• The Japanese font ROM should be installed to the printer board.
(Japan only)
• The printer function should be provided as standard provision.
C. Setup menu
Enter the soft key the machine from “KEY OPERATOR MENU".
D. Function cancel menu
• When the diag menu or the key operator program menu is displayed,
the current machine state (the key is canceled or not) is displayed.
• Display content
ON: The function lock is working.
OFF: The function lock is canceled.
• Regardless of the display position
3. Email alert status
A. Setup contents
• The soft key is supplied by registering the manufacturing number
and the model name of the machine and the fixed application num-
ber via the Web site.
Enter the soft key to the machine, and the email alert and status
function can be operated.
If, however, the setup enable conditions are not satisfied, inputs are
disabled.
• When the soft key is erroneously inputted:
When the function lock is canceled: the function lock turns to work.
When the function lock is working: the function lock is kept working.
B. Setup enable conditions
• The printer expansion kit (including the standard equipment) should
be installed.
• The network card kit (NIC) should be installed.
C. Setup menu
Enter the soft key the machine from “KEY OPERATOR MENU".
Extra print
mode
ON, OFF* This function is used to reduce wait
time between print jobs and
proceeds efficient print processes
mainly when there are many single
print jobs. Normally it is not used.
When this function is set, multiple
print jobs are processed as a single
job when all of the jobs have the
same print format. On the job status
display, it is displayed with one job
key. When printing is made with the
print hold function, this function
does not work. When the print type
is changed such as when the paper
size is changed, this function is
terminated.
2-sided print
1-SIDED*,
2-SIDED
(BOOK),
2-SIDED
(TABLET)
When "2-SIDED (BOOK)" is
selected, duplex print is made on
the assumption that the left edge of
paper is bound. When "2-SIDED
(TABLET)" is selected, duplex print
is made on the assumption that the
top of paper is bound.
Page
protection
ON*, OFF Sets page protection. Page
protection is a function designed to
prevent data loss errors when
complex data is printed.
ROPM ON, OFF*
Sets whether the ROPM function is
enabled. If the ROPM function is
enabled, print data will be stored in
the printer memory once for printing
onto multiple sheets. This function can
reduce transmission quantity between
the printer and your computer.
Item
Set value
(*: Default value)
Description
PCL symbol
set setting
1 – 35 (3*) Specify the PCL symbol set.
The number of the PCL symbol set
can be checked by printing [PCL
symbol set list] in [list print] of
CUSTOM SETTING.
PCL font
setting
Internal font
(0* – 80),
extended font
(1 –)
The PCL font to be used for printing
can be specified. One type of font can
be selected from the internal fonts or
the expansion fonts (bar code font kit
or flash ROM kit). The default is "0"
(Internal font: Courier).
The types of available fonts can be
checked by printing the font list in
the [list print] of the [CUSTOM
SETTING]. The font list includes the
font names, the numbers and print
out sample assigned to the fonts. In
this setting, the number assigned to
the font to be used is set.
Line feed
code
0* – 3 The line feed code is set by
combination of "CR" (Carriage
Return) code, "LF" (Line Feed"
code, and "FF" (Form Feed) code.
The default is set so that printing is
made by the sent code. To change
the setting, there are four kinds of
combination to select.
Item
Set value
(*: Default value)
Description
Wide A4 ON, OFF* When this item is set, 80 digits of
10CPI font can be printed in one line
on A4 size paper. When setting is
canceled, the print digit number in
one line becomes 78 characters.
Item
Set value
(*: Default value)
Description
Print PS
errors
ON, OFF* When it is set, if a PostScript error
occurs, the error content is printed.
Item
Set value
(*: Default value)
Description