SERVICE MANUAL CODE: 00ZARP17//A1E DIGITAL MULTIFUNCTIONAL SYSTEM OPTION PRINTER EXPANSION KIT MODEL AR-PK1 AR-P17 CONTENTS [1] SYSTEM CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 [2] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 [3] INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 [4] SETTING AND ADJUSTMENTS . . . . . . . . . . . . . . . . . . .
CONTENTS [1] SYSTEM CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 [2] SPECIFICATIONS [5] SIMULATION 1. Operating procedures and operations . . . . . . . . . . . . . . . 5-1 1. Basic specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 2. Simulation code list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 2. Printer controller board . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 3. Details . . . . . . . . . . . . . . . . . . .
[1] SYSTEM CONFIGURATION PCL CONTROLLER CPU COPIER ENGINE System-BUS M B U S M B U S PCI-BUS 32bit/33MHz P C I U S B Ethernet USB2.0 (Full speed mode correspondence) PC 1 2 8 4 [2] SPECIFICATIONS Support OS (Printer Driver) 1.
3. IMC controller board Page memory ROPM Base memory ROPM Expansion memory B. System requirement 48MB 32MB Standard: 168 pin DIMM x 2 slot Max.: 1056MB Computer IBM PC/AT (Include compatible machine) Macintosh Operating system Microsoft Windows 95 Microsoft Windows 98 Microsoft Windows Me Microsoft Windows XP Microsoft Windows NT 4.0 Microsoft Windows 2000 MacOS 8.6 to 9.x, 10.1 or later 4.
Setting direction toward paper feed port = Long side Setting direction toward paper feed port = Short side Transfer direction Transfer direction Actual page size Print area Logic paper size HP/GL picture frame E.
[3] INSTALLATION 2) Cut and remove the cut-out portion from the left rear cabinet. Cut and remove the cut-out portion from the left rear cabinet using a tool such as nippers. (Be careful about the direction of the tool so that the cut surface is flat.) 1. AR-P17 A. Parts included CD-ROM: 1 pc. Operation manual Installation caution sheet Cut-out portion PCL PWB: 1 pc. M3 screws: 3 pcs. (For installation of the parallel and the USB connectors) M3 screws with spring washer: 6 pcs.
Insert the power plug of the copier to the outlet and turn on the main switch. Then, carry out the following procedure. 5) Check for the PCL PWB. 3) Check the PS3. Make the following sequence of selections on the control panel. • Press Special Functions , highlight Configuration and press OK. Press the PRINT key on the operation panel to check to see if the copier enters the print mode. 6) Check for the language.
[4] SETTING AND ADJUSTMENTS 5) To terminate setting, touch the [END] key. CONDITION SETTINGS 1. Printer condition settings EXIT DEFAULT SETTINGS PCL SETTINGS A.
Set value Description (*: Default value) Extra print ON, OFF* This function is used to reduce wait mode time between print jobs and proceeds efficient print processes mainly when there are many single print jobs. Normally it is not used. When this function is set, multiple print jobs are processed as a single job when all of the jobs have the same print format. On the job status display, it is displayed with one job key. When printing is made with the print hold function, this function does not work.
D. Function cancel display • When the diag menu or the key operator program menu is displayed, the current machine state (the key is canceled or not) is displayed. • Display content ON: The function lock is working. OFF: The function lock is canceled. • Regardless of the display position 4.
[5] SIMULATION 24-9 1. Operating procedures and operations Purpose Function (Purpose) * Entering the simulation mode 1) #/P key (program) ON → Asterisk (*) key ON → CLEAR key ON → Asterisk (*) key ON → Ready for input of a main code of simulation 2) Entering a main code with the 10-key → START key ON 3) Entering a sub code with the 10-key → START key ON Data clear Used to clear the printer counter and other counters. (The counter is cleared after completion of maintenance.
[6] CONFIGURATION REPORT AND TEST PAGE 1. Kinds of test pages 2) Touch the [LIST PRINT] key. Test pages are available in the following 6 kinds: • Printer settings list • PCL symbol set list Y T LIST PRINT S • PCL internal font list • PCL extended font list (Only when an option font or an option Flash ROM kit is installed. When a Flash ROM kit is installed, it is displayed only when fonts are downloaded.
[7] FLASH ROM VERSION UP PROCEDURE 1. Printer Control Board firmware download method Please follow the procedure below: (Necessary items for version-up) 1) Make sure copier is turned off, and connect PC and Printer Control board of the copier by parallel cable beforehand. A Personal computer B Centro (printer) cable ∗ Note: It is okay to use serial cable instead. C Software for version-up 2) Turn on the copier. 3) Start up in copier test command mode, and execute Sim67-14 "FLASHDOWNLOAD".
2. Others (Troubleshooting) Followings are the error possibly occur during the download process and troubleshooting method. No 1 Warning/error message Incorrect destination. Continue with the download process? 2 Incorrect download file. 3 No downloadable data included. 4 This option not available. 5 The data size exceeds the Flash ROM size. Try again with the appropriate size of data. 6 Time out error. 7 Communication (incoming) error. 8 Checksum error. 9 Error during the download process.
[8] PRINTER STATUS MONITOR/PRINTER ADMINISTRATION UTILITY 1. Printer status monitor D. Outline of functions A.
(6) Job complete notification When a print job is completed (or interrupted by an error), a notification from the printer is received and displayed. The dialog pop-up shows the notification.
2. Printer administration utility (2) Alert/log function • Alert by the pop-up/sound when the printer status changes. A. Purpose • Making of the alert/log file This application provides easy and simple view of the following items: • What kinds of network printers are connected in the network? • Are the network printers operating normally? • What functions does the printer have? B. Operating environment Windows 95, Windows 98, Windows Me, Windows NT4.
Printer property page (Select a printer from the list and double click it to display this page.) [Paper feed tab] [Device tab] 1) 2) 3) 1) 4) 2) Toner Low Toner Empty Offline Paper Jam Paper Empty Printer Error Cover Open Printer Warning 5) 3) 6) 4) 7) 1) Paper feed tray for normal use: If the driver does not specify any paper feed tray, the printer uses this tray. 2) List of paper feed trays: 3) Description: = Tray name 4) Model name: (Not set in some models.
[Summary tab] Setup [Application] 1) 1) Network and device information: Device information – Descriptions, operating time, etc. Network information – TCP, IP, the number of send/receive packet of SNMP [SHARP NIC tab] 1) 2) 3) 1) Setup: Used to set that the icon is minimized when booting or not, and that the setup content is stored when terminating or not. 1) 2) 3) 2) Network printer retrieval interval: Used to set automatic retrieval of a printer on the network.
[Printer retrieval (TCP/IP)] 1) 2) 3) 1) Printer retrieval on the local network: When this box is checked, the local network address is obtained from the IP address and the sub net mask of the PC where PAU is installed, and a printer on the local network is retrieved. 3) Advanced retrieval dialog box Used to set the printer retrieval on an external network. To specify an external network to be retrieved, enter the network address and the sub net mask of that network.
[9] TROUBLE CODE LIST Trouble code Main Sub code code F9 00 Details of trouble Content Details Cause Check and remedy 10 Content Details Cause Check and remedy 80 Content Details Cause Check and remedy 81 Trouble code Main Sub code code F9 82 Content Details Cause Check and remedy MCU-PRT communication trouble Communication establishment error/ framing/parity/protocol error Printer PWB connector disconnection Harness trouble between the printer PWB and the MCU PWB Motherboard connector pin breakag
[10] ELECTRICAL SECTION PCI connector 1. Block diagram TMPR4927 ADDR[19:0] PCI BUS 32bit/33MHz SDRAM 64MB DATA [31:0] DATA[63:0] DATA [63:0] PIO SDRAM-DIMM 128MB or 256MB RJ45 SPD PIO DP83816 (MAC/PHY) EEPROM 256Kb Flash DIMM 12MB DATA[31:0] Flash-DIMM 8MB(Option) DATA[31:0] Driver DATA[31:0] UART1 (Japan Only) For Debug IO ASIC(Unicorn2) UART0 Connector M-BUS Driver DATA[15:0] Connector Energy-saving I/F correspondence USB2.0(FS) ML60852A System Bus I/F 1284 Cont. Image Cont.
q PARTS GUIDE CODE:00ZARP17//P1/ プリンタ コントローラー PRINT CONTROLLER MODEL AR-P17 このパーツガイドに掲載されている表示価格ランクは消費税抜きです。 CONTENTS 1 梱包＆付属品 (Packing material & Accessories) 2 PCL PWB UNIT(PCL PWB UNIT) ■ 索引 (Index) 本書はサービス活動用に作成した資料です｡ 一部内容が製品の改良・改善等により予告 なしに変わることがあります。 SHARP CORPORATION This document has been published to be used for after sales service only. The contents are subject to change without notice.
補修部品のランク付 市場における補修部品の在庫管理が、適正に運営出来る手助けとなることを、目的とします。 Aランク : メンテナンスパーツ、メンテナンスパーツには入っていないがメンテナンスパーツに近い消耗パーツ。 Bランク : 性能・機能パーツ（センサー、クラッチ等の電気パーツ） 、消耗パーツ。 Eランク : 基板含むユニットパーツ。 Dランク : 整備パーツ（外装、パッキング、同梱パーツ）。 Cランク : 上記ランク以外のパーツ（基板の子部品を除いたもの） 。 DEFINITION Rank Rank Rank Rank Rank A B E D C : : : : : Maintenance parts, and consumable parts which are not included in but closely related to maintenance parts Performance/function parts (sensors, clutches, and other electrical parts), consumable parts Unit parts includi
1 梱包＆付属品 (Packing material & Accessories) 10 9 4 11 2 3 1 5 7 6 PRP01669 2 PCL PWB UNIT(PCL PWB UNIT) NO.
2 PCL PWB UNIT(PCL PWB UNIT) NO. 37 38 39 40 44 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 PARTS CODE VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1HB102K VHDD1FM3+++-1 VHIDP83816+-1 VHIPST598IN-1 VHI24WC256K-1 VHI60852ATB-1 VHI74LCX08FT1 VHI74LCX14FT1 VHI74LCX244FT VHI74LCX245FT VHI74LVX16128 VHI93C46VI+-1 VHPLT1P67A+-1 VHVICPS1.
■ 索引 (Index) PARTS CODE [C] CDSKA0033QS31 [L] LSUPM0002QSZZ LX-BZ0024QSZZ [Q] QCNCM0041QSZZ QCNCW0025QSZZ QCNCW0071GCZZ QCNCW7045XCZZ QSOCN0010QSZZ QSOCZ0079FCZZ [R] RCILZ0353AFZZ RCORF1013ACZZ RCORF1057ACZZ RCRUA0019QSZZ RCRUA0020QSZZ RFILN0010QSZZ RH-IX1013ACZZ RMPTR4103ACZZ RMPTR4330ACZZ RMPTR4472ACZZ RMPTR4560ACZZ [S] SPAKA399ACCZZ SSAKA0006UCZZ [T] TCADZ0288QSZZ TINSE1077QSZZ TINSF1078QSZZ TINSJ1076QSZZ TINSS1079QSZZ [V] VCCCCZ1HH100D VCCCCZ1HH101J VCCCCZ1HH680J VCCUCY1AJ105Z VCEAPH1CC106M VCEAPS1CC2
LEAD-FREE SOLDER CAUTION FOR BATTERY REPLACEMENT The PWB’s of this model employs lead-free solder. The “LF” marks indicated on the PWB’s and the Service Manual mean “Lead-Free” solder. The alphabet following the LF mark shows the kind of lead-free solder. Example: Lead-Free 5mm (Danish) ADVARSEL ! Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandoren.
All rights reserved. Printed in Japan. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic; mechanical; photocopying; recording or otherwise without prior written permission of the publisher. Trademark Acknowledgments Microsoft Windows, MS-DOS, Windows NT, Windows 2000 are trademarks of Microsoft Corporation in the U. S. A. and other countries.
