Specifications

- 20 -
USING THE NETWORK SCANNER FUNCTION
2
IMAGE ORIENTATION AND STANDARD ORIGINAL
LOADING ORIENTATION
When using the document glass, the original should be placed face down so that it is centered vertically on the glass
with the top edge of the original at the left edge of the glass.
When using the SPF/RSPF, the original should be placed face up in the middle of the document feeder tray, with the
top of the original to the right.
Long horizontal originals of size 11" x 17", 8-1/2" x 14", A3, or B4 can only be placed as shown below.
For this reason, the scanned image will be rotated 90° when viewed on a computer.
When an original is scanned using the document glass, the scanning area is determined by the "Scan Size" setting
of the scan mode stored in the destination information. If the orientation of the placed original does not agree with
the scan size setting, not all of the original will be scanned. The following examples show how the scan size setting
affects the resulting image when a letter original is scanned on the document glass.
To change the "Scan Size" setting, see "STORING SCANNING SETTINGS
" (p.11).
Document glass SPF/RSPF Scanning result
Document glass SPF/RSPF Scanning result
Document glass
Scanning result
Scan size = Letter Scan size = Letter-R