Owner's Manual
Table Of Contents
- Part 1: General Information
- PRODUCT CONFIGURATIONS
- OPERATION MANUALS
- INSTALLATION REQUIREMENTS
- CAUTIONS
- CONTENTS
- INTRODUCTION
- MAIN FEATURES
- PART NAMES AND FUNCTIONS
- TURNING THE POWER ON AND OFF
- AUDITING MODE
- LOADING PAPER
- Identifying the trays
- Loading paper in paper tray 1 - tray 2
- Loading paper in paper tray 3
- Changing the paper size in paper tray 3
- Changing the paper size in paper tray 4
- Loading paper in paper tray 5 (optional large capacity tray)
- Specifications (optional large capacity tray)
- Loading paper in the bypass tray
- Specifications of paper trays (Types and sizes of paper that can be used in the trays)
- Setting the paper type and paper size
- Setting the paper size when a special size is loaded
- CUSTOM SETTINGS
- REPLACING THE TONER CARTRIDGES
- STORAGE OF SUPPLIES
- MISFEED REMOVAL
- REMOVING AN ORIGINAL MISFEED
- TROUBLESHOOTING
- FINISHER AND SADDLE STITCH FINISHER
- INSERTER
- Part 2: Copier Operation
- AUTOMATIC DOCUMENT FEEDER
- PLACING ORIGINALS
- CHECKING THE SIZE OF A PLACED ORIGINAL
- STORING, DELETING, AND USING ORIGINAL SIZES
- NORMAL COPYING
- ADJUSTING THE EXPOSURE
- REDUCTION/ENLARGEMENT/ZOOM
- SPECIAL PAPERS
- SPECIAL MODES
- General procedure for using special functions
- Margin shift
- Erase
- Dual page copy
- Pamphlet copy
- Job build
- Tandem copy
- Covers/inserts
- About the explanations of covers and inserts
- Preparations for using covers and inserts
- Procedure for inserting front and back cover paper
- Procedure for adding inserts
- Checking, editing, and deleting cover/insert pages
- Examples of covers and inserts
- Symbols used for covers and inserts
- Covers (One-sided copying of one-sided originals)
- Covers (Two-sided copying of one-sided originals)
- Covers (One-sided copying of Two-sided originals)
- Covers (Two-sided copying of two-sided originals)
- Inserts (One-sided copying of one-sided originals)
- Inserts (One-sided copying of two-sided originals)
- Transparency film with insert sheets
- Multi shot
- Book copy
- Tab copy
- Card shot
- Mirror image
- B/W reverse
- STORING, USING AND DELETING JOB PROGRAMS
- INTERRUPTING A COPY RUN
- USER MAINTENANCE
- TROUBLESHOOTING
- OVERVIEW
- TO USE THE DOCUMENT FILING FUNCTION
- SAVING A DOCUMENT IMAGE FILE
- CALLING UP AND USING A FILE
- CUSTOM SETTINGS
- ENTERING CHARACTERS
- TROUBLESHOOTING
- SPECIFICATIONS
- INDEX
SPECIFICATIONS
8-3
8
* Noise emission when peripheral devices are installed
Continuous copying speed (when the offset function is not used)
AR-M550U/AR-M550N AR-M620U/AR-M620N AR-M700U/AR-M700N
Copy paper size 100% / Reduced / Enlarged
11" x 17" (A3) 30 copies/min. 34 copies/min. 39 copies/min.
8-1/2" x 14" (B4) 35 copies/min. 39 copies/min. 45 copies/min.
8-1/2" x 11" (A4) 55 copies/min. 62 copies/min. 70 copies/min.
8-1/2" x 11"R (A4R) 40 copies/min. 45 copies/min. 48 copies/min.
7-1/4" x 10-1/2" (B5) 55 copies/min. 62 copies/min. 70 copies/min.
7-1/4" x 10-1/2"R (B5R) 40 copies/min. 45 copies/min. 48 copies/min.
8-1/2" x 5-1/2"R (A5R) 40 copies/min. 45 copies/min. 48 copies/min.
Center tray specifications
Output method Face-down output
Maximum number
of sheets
(20lbs. (80g/m
2
)
/recommended
paper)
250 sheets*
Paper type Plain paper and special paper
* The maximum number of pages that can be held varies
depending on ambient conditions in the installation
location, the type of paper, and the storage conditions of
the paper.
85%
(Humidity) Operating conditions
(Temperature)
60%
20%
10
30 35
Acoustic Noise Emission (measurement according to ISO07779)
Printing mode Standby mode
Sound power level
LwA
7.3B 5.0B
Sound pressure level L
pA
(reference)
Bystander positions 58dB(A) 34dB(A)
Operator position 58dB(A) 35dB(A)
Emission Concentration (measurement according to RAL-UZ62: Edition Jan. 2002)
Ozone 0.02 mg/m
3
or less
Dust 0.075 mg/m
3
or less
Styrene 0.07 mg/m
3
or less
dragon_08.fm 3 ページ ２００４年３月１８日 木曜日 午後２時３２分