Specifications

Note
• This operation manual (fax function) describes the AR-M236/AR-M276 model with optional reversing single
pass feeder (AR-RP7), optional job separator tray kit (AR-TR3), and optional facsimile expansion kit
(AR-FX7) installed. Depending on the model you have and on the options installed, some of the illustrations
in this manual may be different, however, the basic operations are the same.
• This manual (fax function) refers to the Reversing Single Pass Feeder as the "RSPF".
This equipment has been tested according to the pan-European TBR 21 regulation. It will operate on all analogue
telephone networks which comply with the TBR 21.
Please contact your dealer or network operator, if you are not sure whether your network operates according to TBR 21.
• This is a Class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Important safety information
• If any of your telephone equipment is not operating properly, you should immediately remove it from your
telephone line, as it may cause harm to the telephone network.
• The AC power outlet shall be installed near the equipment and shall be easily accessible.
• Never install telephone wiring during a lightning storms.
• Never install telephone jacks in w et locations unless the jack is specifically designed for wet locations.
• Never touch uninsulated telephone wires or terminals unless the telphone line has been disconnected at the
network interface.
• Use caution when installing or modifying telephone lines.
• Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of
electric shock from lightning.
• Do not install or use the machine near water, or when you are wet. Take care not to spill any liquids on the
machine.
The Declaration of Conformity can be viewed at the following URL address.
http://www.sharp.de/doc/AR-FX7.pdf