Owner's Manual

5
LIST OF KEY OPERATOR
PROGRAMS
A complete list of all key operator programs is provided below. These programs can only be accessed
by first entering the key operator code number.
Category Program Name Function Page
No.
Function setting Key Operator Number
Change
Changes the key operator code number. 9
Exposure Adjust Lightens or darkens copies in the automatic
exposure mode.
9
Margin Default Sets the initial margin shift values. 9
Erase Adjust Sets the initial amount of the erase area. 10
Stream Feeding Enables the stream feeding mode for copying
from a RSPF.
10
Rotation Copy Enables/disables rotation of original images. 10
Output Trays Sets the output trays for the copy and printer
modes. (This program can be used only if an
optional finisher or job separator tray kit is
installed.)
11
Offset Function Enables/disables the offset function in the output
tray.
11
Memory for Printer Sets the memory assignment used for printer
feature.
12
Toner Save Mode Reduces toner consumption. 12
Timer setting Auto Power Off Sets a time interval after which the copier enters
the auto power shut-off mode.
13
Auto Clear Sets a time interval after which the copier returns
to the initial settings.
13
Preheat Mode Sets the time that elapses before the copier
enters the preheat mode after copying is
completed.
14
Time Out Setting Sets the time after which a print or fax job
resumes. (This program can be used only if an
optional facsimile expansion kit is installed.)
14
Ar-M208_keyope_sec.book 5 ページ ２００２年６月１２日 水曜日 午後３時４１分